Rancilio 10 USB Technician Manual page 39

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
5.2.2.3 Total counters
Displays the total number of counters available for
each coffee group, for the water group and for the
iSteam group, plus the total summary thereof.
5.2.3 Graphics
GRAPHICS
5.2.3.1 Logo monitoring
Provides for setting of the following features:
-
Logos ON/OFF selection
-
Logo display sequence
-
Logo display time (for the "Loop" logo, this
setting amounts to the display time of one single
screen page)
5.2.3.2 Quick show
Enabling this function enables continuous viewing of
the display logos.
It is possible to interrupt display of logos in the event
of:
-
Coffee dispensing
-
Hot water/4-TEA dispensing
-
iSteam dispensing
5.2.4 iSteam
ISTEAM
5.2.4.1 iSteam presence
Provides for setting of iSteam presence in the ma-
chine.
5.2.4.2 milk frothing
Setting of the milk's final temperature and emulsion
grade, on a scale from "0" to "MAX".
If set at level "0", the milk is only heated. Increasing
the emulsion level will increase the milk frothing gra-
de. The default setting here is the "MAX" level.
LOGO SETTING
QUICK SHOW
ISTEAM MODULE
FOAMED MILK
STEAMED MILK
5.2.4.2 No milk frothing
Setting of the milk's final temperature and emulsion
grade, on a scale from "0" to "MAX".
If set at level "0", the milk is only heated. Increasing
the emulsion level will increase the milk frothing gra-
de. The default setting here is the "0" level.
5.2.5 Wash cycles
CLEANING
5.2.5.1 coffee wash cycle
Setting of the automatic daily washing cycle.
Here it is also possible to set the coffee dispensing
block function, if the coffee group wash cycle is not
performed within one hour from the appearance, on
display, of the relative wash cycle message.
5.2.5.2 Wash cycle counter
Displays the number of coffee wash cycles that have
been performed.
5.2.6 Data interfaces
DATA
INTERFACES
Setting of the Rancilio IDS (Interface Data System)
for data interfacing.
It is possible to set either the DEBIT operating func-
tion (data discharge only) or the CREDIT operating
function (with dispensing enabled via the cashbox
system).
In the event that this function is enabled without the
interface, the machine will go into block mode.
COFFEE CLEANING CYCLE'
CLEANING COUNTER
CONNECTION IDS
9

Advertisement

Table of Contents
loading

Table of Contents