Intel Mrc Post Codes; Intel Mrc Error Codes - Gigabyte MU71-SU0 User Manual

Unsupported topology
RC Behavior: System Halt
SBSP cannot find KPIRC TXEQ Parameters for this
link in GetSocketLinkEparams(). No retry.
RC Behavior: System Halt

2-8-6 Intel MRC POST Codes

Detect DIMM population
Set DDR frequency
Gather remaining SPD data
Program registers on the memory controller level
Evaluate RAS modes and save rank information
Program registers on the channel level
DDRIO Initialization
Train DDR
Initialize CLTT/OLTT
Hardware memory test and init
Execute memory init
Program memory map and interleaving
Program RAS configuration
Rank margin tool
MRC is done

2-8-7 Intel MRC Error Codes

No memory was detected
Memory test failure
Different dimm types are detected installed in the system
Number of HAs found in system greater than
MAX_HA defined in MRC build
Indicates a CLTT table structure error
Invalid VR mode, unable to set DRAM VDD
Failure occurred reserving memory for IOT
Reference code assert
Unsupported MC frequency set
Unable to get current MC frequency
- 89 -
0xDC
0xDD
0xB0
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
0xBA
0xBB
0xBC
0xBD
0xBF
0xE8
0xEB
0xED
0xEE
0xEF
0xF0
0xF1
0xF2
0xF3
0xF4
BIOS Setup