Gigabyte MU71-SU0 User Manual page 56

Parameter
Interleave NVDIMMs
Assert ADR on Reset
Assert ADR on S5
Memory Topology
Memory Map
Memory RAS Configuration
BIOS Setup
Description
Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is Disable.
Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is Disable.
Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is Disable.
Press [Enter] to view memory topology with DIMM population
information.
Press [Enter] to configure advanced items.
IMC Interleaving
Š
– controls the interleaving between the Integrated Memory
Controllers (IMCs).
– Options available: Auto, 1-way Interleave, 2-way Interleave.
Default setting is Auto.
Press [Enter] to configure advanced items.
RAS Type
Š
– Displays the RAS type.
Static Virtual Lockstep Mode
Š
– Enable/Disable the Static Virtual Lockstep mode.
– Options available: Disable/Enable. Default setting is Disable.
Mirror Mode
Š
– Mirror Mode will set entire 1LM/2LM memory in system to be
mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.
– Options available: Disable/Enable Mirror Mode (1LM). Default
setting is Disable.
Memory Rank Sparing
Š
– Enable/Disable Memory Rank Sparing. This feature is only
available on 1LM.
– Options available: Disable/Enable. Default setting is Disable.
Correctable Error Threshold
Š
– Correctable Error Threshold (1-32767) used for sparing, tagging,
and leaky bucket.
– Press the <+> / <-> keys to increase or decrease the desired
values.
SDDC Plus One
Š
– Enable/Disable SDDC Plus One.
– Options available: Disable/Enable. Default setting is Disable.
- 56 -