Table of Contents
Advertisement
5) SW_RAID (SATA RAID Upgrade Key)
SW_RAID
5/6/7/8/9/10/11) CPU0_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4/SYS_FAN5
SYS_FAN6 (CPU Fan/System Fan Headers)
The motherboard has one 4-pin CPU fan header (CPU_FAN), and two 4-pin (SYS_FAN) system fan headers.
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect
it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU
fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat
dissipation, it is recommended that a system fan be installed inside the chassis.
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
Hardware Installation
SYS_FAN6
Pin No. Definition
1
2
3
4
1
CPU0_FAN
Pin No. Definition
1
2
3
4
- 18 -
4
1
GND
P_3V3_AUX
GND
PCH_SATA_RAID_KEY
1
GND
+12V
Sense
Speed Control
Advertisement
Table of Contents
