General Operation - Dual XDVD9101 Installation & Owner's Manual

XDVD9101 OPERATION

General Operation

Power On/Off Momentarily press PWR or any other button (except EJECT) to turn the unit on.
Hold for 3 seconds to turn the unit off.
Mute Press MUTE to silence the audio;
Press MUTE again to cancel.
Loudness
Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the
MUTE button on the front panel or remote will also turn the Loudness on/off.
Mode
Press MODE to select between Tuner, Disc (which includes DVD and CD
playback), operation of iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Modes of
operation are indicated on the OSD On Screen Display). Optional iPod device or
USB flash drive must be connected/inserted to appear in the MODE selection
string.
Optional Mode Selection
Press MENU at the top left corner of the screen to display the OSD main menu.
Press Tuner, Disc, operation of iPod, USB, AV/1, AV/2 or Camera in the MAIN
menu page to select the desired source.
Volume
Turn the rotary or use the volume
higher (0-46). The current volume level will be displayed on the secondary LCD
when the monitor is closed or on the LCD (to the right of the volume icon
will cancel the mute function.
Audio Setup
From Tuner, Disc (CD only), operation of iPod or USB mode, touch EQ on the
(from OSD)
OSD or press the rotary momentarily to enter the Audio Setup menu. Adjust
audio parameters by pressing the desired level you wish to change.
will return back to previous mode after 15 seconds of inactivity or by pressing
the RETURN arrow in the top right corner.
Audio Setup
Press the SEL button. Press the p or q buttons on the remote to select an
(from remote)
item to be adjusted. Press t or u to decrease (-) or increase (+) the current
level. Press RETURN on the OSD or the ESC button on the remote control to exit
the audio control
Note: The Bass and Treble levels are only adjustable when EQ is set to "User"
mode. The Loud function compensates for deficiencies in sound ranges at low
levels. When the Loud function is on, LOUD:On is displayed in the OSD.
15
All manuals and user guides at all-guides.com
will appear in the OSD (On Screen Display).
t or u
) when the monitor is open. Turning the rotary while the volume is muted
menu.
to adjust the volume level lower or
Operation