Dual XDVD9101 Installation & Owner's Manual page 11

Control Functions - Monitor Closed
Display When the monitor is closed, press DISP to toggle display between
information available for the current mode such as clock, frequency, track or
chapter information.
Secondary LCD Additional LCD for system information while monitor is closed.
Open Monitor Press OPEN to open or close the monitor. Be careful not to not touch
or obstruct the monitor movement during the open/close sequence, or
permanent damage could occur.
3.5mm A/V Input Connect external devices or the included cable for an iPod device to this
3.5mm auxiliary audio/video input.
USB Input
Insert USB flash drive to play MP3, WMA or JPEG files. Connect included
cable for an iPod device to control and charge an iPod device.
Reset To resolve abnormal operation or if the unit is inoperable, press the
RESET button located to the left of the USB input on the front panel.
will reset the main processor to the default settings.
Note: Use the tip of a pen to access the reset button. To restore the factory
default settings, refer to page
Channel/Chapter/Track Up
Press to select the next channel/chapter/track for playback.
Fast Forward Press and hold to manual tune up or fast forward.
Play/Pause In disc mode, press once for PAUSE, and "PAUSE" will appear in the display.
Press again to resume PLAY.
Channel/Chapter/Track Down
Press to select the previous channel/chapter/track for playback.
Fast Reverse Press and hold to manual tune down or fast reverse.
Disc-in Indicator Red = Disc inserted, Blue = No disc.
Infrared Sensor Point the remote control towards the infrared sensor to control various
functions of the unit.
Band Press BAND to increment from FM1, FM2, ] AM.
BAND momentarily to stop disc play.
Mode Press MODE to select between Tuner, Disc (which includes DVD and CD
playback), operation of iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Each
time the MODE button is pressed the next mode is chosen. Modes of
operation are indicated on the OSD or the secondary LCD. Optional iPod
device or USB flash drive must be connected/inserted to appear in the MODE
selection string.
Mute Press MUTE to silence audio output. "MUTE" will flash in the secondary
display. Press MUTE again to restore audio at previous volume level. Press
and hold MUTE to toggle the Loudness function On or Off.
Eject Press
All manuals and user guides at all-guides.com
XDVD9101 OPERATION
19.
once to eject disc.
The unit
While in disc mode, press
10