Download Print this page
Dual XDVD9101 Installation & Owner's Manual
Dual XDVD9101 Installation & Owner's Manual

Dual XDVD9101 Installation & Owner's Manual

Dvd multimedia receiver with 7" touch screen display

Advertisement

Quick Links

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the
parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Advertisement

loading
Need help?

Need help?

Do you have a question about the XDVD9101 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dual XDVD9101

  • Page 1 The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
  • Page 2 This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
  • Page 3 Warning Statement ..........Safety Information/Precautions .
  • Page 5 Due to its technical nature, it is highly recommended that your DUAL XDVD9101 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
  • Page 6 Please read entire manual before installation. would be subject to dust, dirt or excessive vibration. Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm)
  • Page 7 audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. A rear view camera (not included) can be used with the input. Refer to page 64 for details. Call our Technical Service Hotline, 1-866-382-5476.
  • Page 10 Display Channel/Chapter/Track Down/Fast Reverse Secondary LCD Disc-In Indicator Open/Close Monitor Infrared Sensor 3.5mm A/V Input Band/Disc Stop USB Input Mode Reset Mute/Loudness Channel/Chapter/Track Up/Fast Forward Power/Volume/EQ Play/Pause Eject EQ indicator Song title indicator Loudness indicator Artist name indicator Distance indicator Album name indicator Intro indicator Main information display...
  • Page 11 When the monitor is closed, press to toggle display between information available for the current mode such as clock, frequency, track or chapter information. Additional LCD for system information while monitor is closed. Press OPEN to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.
  • Page 12 Momentarily press or any other button (except ) to turn the unit on. Press for more than 3 seconds to turn the unit off. Turn the rotary to adjust the volume level lower or higher (0-46). The current volume level will be displayed on the secondary LCD when the monitor is closed.
  • Page 13 Close Monitor Screen Angle Up Info/Picture Screen Angle Down Press to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. Press to display DVD disc information in DVD mode. Holding this button for 3 seconds brings up the Brightness setting, which can be adjusted by turning the rotary encoder or by pressing the buttons on the main remote control.
  • Page 14 Key #9 Root Power Mute/Loudness Escape Repeat Open/Close Search Chapter/Track/Seek Tune Down Key #0/DVD Setup Chapter/Track/Seek Tune Up Mode Volume Up Audio Select Fast Reverse/Manual Tune Down Key #1 Menu Fast Forward/Manual Tune Up Key #2 4-Way - Up Zoom Play Audio Key #3...
  • Page 15 Power Press once to turn the unit on, press again to turn unit off. Mute Press once to audio; press again to return audio. Press and hold to activate Loudness On/Off. Open Press once to open monitor; press again to close the monitor. Mode Press once to incrementally select desired source.
  • Page 16 Momentarily press or any other button (except ) to turn the unit on. Hold for 3 seconds to turn the unit off. Press to silence the audio; will appear in the OSD (On Screen Display). Press again to cancel. Press on the OSD to turn the Loudness on/off.
  • Page 17 Press momentarily to display DVD disc information. Press and hold for 3 seconds to change monitor Turn the rotary to adjust to desired level. (0 minimum/20 maximum; 10 is default). When a video source is connected to the front or rear auxiliary inputs, press for more than 2 seconds to adjust COLOR SETUP during video play.
  • Page 18 There are two methods to access the MAIN menu: Press button on the remote control. or the upper left corner of the touch screen from any mode. Touch to access mode. Touch to access mode ( must be inserted). Touch to access mode (optional must be connected to activate).
  • Page 19 Press icon to access the Main setup mode. Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the arrow in the top right corner. Press the icon to access Main Setup page 2. Setup Menu matrix - page 1 Settings Default...
  • Page 20 Press icon to access the Main setup mode. Press the icon to access Main Setup page 2. Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the arrow in the top right corner.
  • Page 21 Touch at the top left corner of screen. Touch icon. Touch Touch the setting for your region. Touch to exit.
  • Page 22 Touch at the top left corner of screen. Touch icon. 3) Touch 00:00 area in the row. 4) When keypad appears, enter , followed by 5) When finished, touch 6) Touch to exit. For 24Hr format, select 24Hr from , then follow steps 1-6.
  • Page 23 The default Anti-theft password is 0000 and is turned off by default. To turn this feature on, follow the steps below. This will lock your unit from operating if battery power is disconnected. 1) Touch 2) Touch icon. 3) Touch down arrow icon. 4) Touch ****.
  • Page 24 From the main menu, press icon to access the setup mode. Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the button. Setup Menu matrix Settings Default Options Function Brightness...
  • Page 25 1) Touch at the top left corner of screen. 2) Touch icon. 3) Touch [-] to reduce brightness. 4) Touch [+] to increase brightness. 0 - 20 is possible Default = 10 5) Touch to exit.
  • Page 26 1) Touch at the top left corner of screen. 2) Touch icon. 3) Touch to decrease the screen angle. 4) Touch to increase the screen angle. 1 - 4 is possible Default = 1 5) Touch to exit.
  • Page 27 1) Touch at the top left corner of screen. 2) Touch icon. 3) Touch in TS Calibration row. 4) Touch the pointers as indicated on the screen. 5) Screen will automatically return to when the calibration procedure is complete.
  • Page 28 From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. Current Source Indicator Displays source currently playing. Main Menu Touch to access the main menu. Stereo Indicator Shows that the frequency selected is received in stereo. Information Indicator Displays status of various tuning functions including Auto Station Store, Preset Scan, Scan tuning, etc.
  • Page 29 Tune Frequency - Up Touching this icon will tune the radio to a higher frequency by one frequency step. Touch and hold for continuous tuning up. (This function can also be performed by pressing the corresponding key on the remote control.) Tune Frequency - Down Touching this icon will tune the radio to a lower frequency by one frequency step.
  • Page 30 From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press until the current station information is displayed on the screen. Touch on the screen repeatedly until the desired band is displayed, FM1, FM2 or AM.
  • Page 31 To select a desired station from the preset station list, touch any of the displayed station frequencies or preset numbers from the list. Use the up and down arrows on screen to select between the preset pages, if necessary. From the remote control: Press to scroll through the presets.
  • Page 33 Follow these two initialization procedures carefully to allow video playback on on the XDVD9101 front monitor: There are two situations to initiate the PARKING BRAKE sequence. 1) Stop vehicle, put in Park, make sure PARKING BRAKE is off/released.
  • Page 34 Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD9101 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas.
  • Page 35 With the label facing up, insert a standard size disc into the slot. The disc will automatically begin playback. Other sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features. If PARENTAL Lock is activated and the disc inserted is not authorized, a 4-digit code must be entered and/or the disc be authorized.
  • Page 36 There are several hidden areas as outlined below: "A" area can be used in DVD, AUX 1 and AUX 2 modes to access menu. A - Displays menu B - Displays disc information C - Selects chapter D - Selects chapter E - Displays the transport controls...
  • Page 37 With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed.
  • Page 38 With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed.
  • Page 39 With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed.
  • Page 40 From the main menu, touch the DISC icon on the screen to select DVD mode. Setup Menu Accesses the DVD Setup menu Stop Touch the icon to stop the chapter where it is. Touch again to stop the disc (full stop). Fast Reverse Touch the icon to fast reverse at 2x speed.
  • Page 41 Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD9101 plays discs according to their intentions, some functions may not work as intended. Please be...
  • Page 42 Touch Area E to bring up the on-screen buttons. Touch to fast forward or to fast reverse. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x. From the front panel: Press and hold to fast forward.
  • Page 43 Touch to change the audio stream. Each touch will cycle the language. From the remote control: Press the button to select the stream. limited. stream can only be changed while the DVD is playing. Touch Area B or press to bring up the , which includes: Current/Total Titles (1) and Chapters (5), elapsed time for current title (2), EQ Mode (3) and Loudness setting (6) and current time (4).
  • Page 44 From the main menu, touch the icon on the screen to select CD mode. Current Source Indicator Displays source currently playing. Track Number Indicator Displays current track number and total number of tracks on the disc. Track Time Indicator Shows the elapsed time of the current track. Track Title List Displays up to 6 tracks on the disc in order, with track number.
  • Page 45 Page Down Touch the icon to see the next 6 tracks on the disc. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed.
  • Page 46 Navigate the track title list in one of two ways: To select a desired track from the track title list, touch any track on the list. From the remote control: Press to scroll through the tracks. When the correct track is highlighted press To navigate forwards or backwards through all tracks, press on the...
  • Page 47 Touch to repeat a track. will appear next to the button while this feature is activated. Touch again to exit Random Mode. From the remote control: Press to select Repeat. Press it a second time to disable Repeat. modes can not be used simultaneously and engaging one mode will cancel the other mode (if active.) From the remote control: Press A...
  • Page 48 From the main menu, touch the icon on the screen to select MP3/WMA mode. Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the current folder. Elapsed Time Indicator Shows the elapsed time of the current song.
  • Page 49 Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed.
  • Page 50 The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist. Indicates that sound files are currently displayed. Press to switch to viewing image files. Indicates that image files are currently displayed. Press to switch to viewing sound files.
  • Page 51 From the remote control: Press to fast forward. Press to fast reverse. Touch on the screen to listen to all tracks in the current folder for 10 seconds at a time, starting from the next track. will appear next to the button while this feature is activated.
  • Page 52 From the main menu, touch the icon on the screen to select USB mode. Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the current folder. Elapsed Time Indicator Shows the elapsed time of the current song.
  • Page 53 Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. Fast Reverse Touch the icon to fast reverse at 2x speed.
  • Page 54 Connect a device using the USB port on the front of the XDVD9101. The unit will automatically switch to USB mode when a USB device is detected. The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist.
  • Page 55 From the remote control: Press to fast forward. Press to fast reverse. Touch on the screen to listen to all tracks in the current folder for 10 seconds at a time, starting from the next track. will appear next to the button while this feature is activated.
  • Page 56 ISO9660 Level 1, Level 2 Level 3 ISO9660 JOLIET Playback Extension Filename 32 bytes 32 bytes Other ROMEO Playback Extensions Filename Apple ISO .mp3/.MP3/.Mp3/.mP3 .wma/.WMA .rmp/.m4a MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 8/11.025/12/16/22.05 24/32/44.1/48kHz MPEG 2 32/44.1/48kHz MPEG 2.5 8/11.025/12/16/22.05 24/32/44.1/48kHz 22.05/32/44.1/48kHz...
  • Page 57 FAT 12 FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 .wma/.WMA .rmp/.m4a MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 8/11.025/12/16/22.05 24/32/44.1/48kHz MPEG 2 32/44.1/48kHz MPEG 2.5 8/11.025/12/16/22.05 24/32/44.1/48kHz 22.05/32/44.1/48kHz MPEG 1 8 ~ 320kbps MPEG 2 64 ~ 912kbps MPEG 2.5 8 ~ 320kbps 32 ~ 192kbps Directory Depth Unlimited...
  • Page 58 The following types of discs are compatible: The following types of discs/files are compatible: Some recordable DVD's and CD's may be incompatible with this unit, depending on media type and recording method. MP3/WMA playback sequence is based on recorded order of files and begins in the root folder of the disc or USB flash drive.
  • Page 59 From the main menu, touch the icon on the screen. Current Source Indicator Displays source currently playing. Song Number Indicator Displays current song number and total number of songs. Elapsed Time Indicator Shows the elapsed time of the current song. Artist Information Displays the artist information for the currently selected song Playlist...
  • Page 60 Fast Forward Touch the icon to fast forward at 2x speed. Touch again to cancel. Fast Reverse Touch the icon to fast reverse at 2x speed. Touch again to cancel. Album Information Displays available album information for the current song. Track Up Touch to skip ahead to the next song.
  • Page 61 Use the included 2-wire iPod cable to connect an iPod to the XDVD9101. The unit will automatically switch to iPod mode when an iPod is connected. The songs in the iPod are organized by groups. Touch the on the screen to access the group select mode: Once in Group Select Mode select one of the group types from the menu, then select an item in that group.
  • Page 62 You can use the Fast Forward and Fast Reverse on-screen buttons to play a song forwards or backwards at a higher speed. Touch the same button a second time or press Play to return to normal playback. From the remote control: Press to fast forward.
  • Page 63 FILES are only compatible with G5 iPod. The iPod photo/video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. iPod photo/ video functions will only operate when vehicle is in Park and the icon, iPod will disconnect and wait for video signal.
  • Page 64 Playlists Artists Albums Genres Songs Composers Touch desired Folder, music will begin to play after selection. Only alphanumeric characters can be displayed (ASCII type). Artist Name and Album name will only be displayed if included with the song. The following models are supported: Refer to your iPod instruction manual for details on how to obtain the latest software.
  • Page 65 Connect an optional audio/video source into the 3.5mm (front panel) input. Select AV/1 from the Main Menu to listen to audio. Engage parking brake as described on page 32 to watch video. Adjust volume on the external audio source as needed (if connected to the headphone output).
  • Page 66 A slight adjustment of any custom Dual Electronics Corp. warrants this product to controls may save you a service call. the original purchaser to be free from defects in material and workmanship for a period of one 2.
  • Page 67 Frequency response: Channel separation @ 1kHz: D/A converter: Tuning range: Usable sensitivity: 50dB quieting sensitivity: Stereo separation @ 1kHz: Frequency response: Tuning range: Usable sensitivity: Frequency response: Panel size: View angle (up/down/left/right): Resolution: Brightness (cd/m 2 ): Contrast ratio: Elements: Operating voltage: Speaker output impedance: Line output voltage:...
  • Page 68 Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage (11~16VDC) voltage Red wire not connected or incorrect voltage Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers One or more speaker wires touching each Insulate all bare speaker wires from each other and other or touching chassis ground...
  • Page 72 Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2008 Dual Electronics Corp. All rights reserved. NSA1008-V01 Printed in China...