General Operation - Dual DCPA1013 Installation & Owner's Manual

DCPA1013

General Operation

Power On/Off Momentarily press to turn the unit on. Press and hold to turn
the unit off.
Volume Rotate the volume knob to increase or decrease the volume level.
Mute Momentarily press MUTE to silence the audio. Momentarily press
MUTE again to return to the previously selected volume. Rotating
the volume knob while the volume is muted will also cancel the
mute function.
Mode Press SOURCE to step through the following modes of operation:
Radio/BT Phone/BT Audio/Apple CarPlay/Android Auto/USB/
Camera/EQ/AV/Settings.
Note: Modes of operation can also be accessed by selecting the
corresponding icon from the main menu.
Main Menu Press the icon at the top left corner of the screen to display
the OSD main menu. Press the Radio/BT Phone/BT Audio/Apple
CarPlay/Android Auto/USB/Camera/EQ/AV/Settings icons to select
the desired source.
A/V In Connect external devices to the rear RCA Type A/V Input.
USB Connect a USB flash drive to the rear USB Input.
Reset
To resolve abnormal operation or if the unit is inoperable, press the
RESET button located on the front panel as shown in the Control
Locations section. The unit will reset the main processor to the
default settings.
Note: Use the tip of a pen to access the reset button and restore
the factory default software settings.
9