Troubleshooting - Dual XDVD9101 Installation & Owner's Manual

XDVD9101 OPERATION

Troubleshooting

Problem
Yellow wire not connected or incorrect
voltage Red wire not connected or incorrect
Unit will not turn on
voltage
(no power)
Black wire not connected
Fuse blown
Speaker wires not connected
Unit has power
One or more speaker wires touching each
(but no sound)
other or touching chassis ground
Yellow or red wire touching chassis ground
Unit blows fuse Speaker wires touching chassis ground
Incorrect fuse rating
Unit has audio Parking brake safety circuit not connected
(but no video) Parking brake not applied
No video display Reverse circuit not connected
(when in reverse) Vehicle is not in reverse
DVD does not start Physical defect in media
playback Wrong region
Dead battery
IR remote does not work
Unit is not mounted correctly
Excessive skipping
Physical defect in media
Invalid Disc appears Focus error or disc is in upside down
on display
Invalid Region appears on
Region code error
display
Front panel will not Front panel obstructed
open/close
67
All manuals and user guides at all-guides.com
General
Cause
Check connections for proper voltage (11~16VDC)
Check connection to ground
Replace fuse
Check connections at speakers
Insulate all bare speaker wires from each other and
chassis ground
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Check connections at parking brake
Apply parking brake as described on page 32
Check connections at reverse lamp
Select reverse gear
Check media for scratches
Use discs labeled "Region 1" or "All" only.
Replace battery
Check mounting sleeve
Check media for scratches
Press eject or RESET
Use only DVD's labeled "Region 1" or "All" only.
Remove the obstacle and press OPEN to resume the
monitor open/close sequence.
Action