Dual XDVD9101 Installation & Owner's Manual page 12

XDVD9101 OPERATION
Control Functions - Monitor Closed
Power
Volume
EQ Presets
Caution
11
All manuals and user guides at all-guides.com
Momentarily press PWR or any other button (except EJECT) to turn the unit on.
Press PWR for more than 3 seconds to turn the unit off.
Turn the rotary to adjust the volume level lower or higher (0-46). The current
volume level will be displayed on the secondary LCD when the monitor is
closed. Turning the rotary while the volume is muted will cancel the mute
function.
Press the volume knob momentarily to select between Flat, Classic, Pop, Rock
or User EQ presets.
• Due to its highly technological design, the XDVD9101 faceplate is NOT
removable. Do not attempt to remove the faceplate.
• Upon installation, do not attempt to move the monitor by hand. Use the
or buttons, the OPEN button on the front panel or the remote control.
• The unit will stop if it encounters any obstacles during the open/close
sequence. If this occurs, remove the obstacle and press OPEN again to
resume the monitor open/close sequence.