MINN KOTA MKA-53 Manual

The MKA-53 is recommended with the Ulterra™, Terrova ® , PowerDrive™, PowerDrive V2 and the Pontoon PowerDrive™ Minn Kota ® Motors and
the Deckhand 40. The RTA-54 is recommended with the RT Ulterra™, RT Terrova ® , RT PowerDrive™ and RT PowerDrive V2 Minn Kota ® Motors.
Item /
Part # Description
Assembly
A
2994935 BAG ASM, HT COMP QRB
Items 2-16
2 2372633 PIN-PADLOCK MAX/AT QCK REL.
4 2373484 SCREW-1/4-20 X 7/8 PFH SS
6 2260800 CLIP-HAIR SPRING,SS,MAX BG
8 2223446 SCREW-1/4-20 X 2" PFH SS
10 2371712 WASHER-FLAT 9/32 X 5/8 X 1/16
12 2373482 SCREW-1/4-20 X 3" PFH SS
14 2261713 WASHER-1/4 FLAT 18-8 SS
16 2073100 NUT-HEX 1/4-20 NYLOC-JAM SS
B
2990955 HANDLE ASM, HT COMP QRB
Items 18-22
18 HANDLE, SS, HT COMP QRB
✖
20 PIN-LOCKING, SS, HTC QRB
✖
22 SCREW-5/16-18 X 3/4 BHCS SS
✖
2991690 PLATE ASM, BLACK, HTC QRB
C
Items 24-26
2991691 PLATE ASM, WHITE, HTC QRB
2371690 PLATE-INNER, BLACK, HTC QRB
24
2371691 PLATE-INNER, WHITE, HTC QRB
2371692 PLATE-OUTER, BLACK, HTC QRB
26
2371693 PLATE-OUTER, WHITE, HTC QRB
2378848 STIFFENER-PLATE/PUCK,BLK
28
2378849 STIFFENER-PLATE/PUCK,WHT
2374951 INSTRC. HT COMPOSITE QRB
p
p Not shown on Parts Diagram.
✖ This part is included in an assembly and cannot be ordered individually.
TOOLS AND RESOURCES REQUIRED
• #3 Phillips Screw Driver
• Drill
MOUNTING CONSIDERATIONS
It is recommended that the motor be mounted as close to the
centerline of the boat as possible. The motor must not encounter
any obstructions as it is lowered into the water or raised into the
boat when stowed and deployed. Make sure the motor rest is
positioned far enough beyond the edge of the boat. Make sure the
area under the mounting location is flat, clear to drill holes and
install nuts and washers.
©2019 Johnson Outdoors Marine Electronics, Inc.
Qty.
1
1
1
1
6
6
4
4
10
1
1
2
2
1
1
1
1
1
1
1
1
1
• Scissors
• 17/64" Drill Bit
MKA-53/RTA-54 ELECTRIC STEER
COMPOSITE RELEASE BRACKET
C
24
28
8
A
4
2
NOTICE:
Images are a graphical representation and
may vary from your motor. Save the box! A template for
installation is printed on the inside of the box.
• 7/16" Box End Wrench
• 33/64 (.516") Drill Bit
Complete Typical Installation
1854053 & 1854054
26
20
18
B
16 10 14
• A second person to help with
the installation
minnkotamotors.com | 1
22
12
6