Dimm Installation Guidelines; Installing Dimms - HP ProLiant ML350 Generation 4p User Manual

52 HP ProLiant ML350 Generation 4p Server User Guide
•
Online Spare Memory operates with four or six DIMMs.
After installing DIMMs, use RBSU to configure the system for online spare
memory support.

DIMM Installation Guidelines

You must observe the following guidelines when installing additional memory:
•
Always install DIMM pairs in a memory bank with identical DIMMs.
•
Install only PC2-3200R DIMMs.
•
Install DIMMs into both slots within a single bank.
•
Upgrade memory by installing DIMM pairs into banks in sequential bank
order, starting with bank B.
For online spare memory support, you must also observe additional guidelines.

Installing DIMMs

1. Power down the server ("Powering Down the Server" on page 25).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 26).
3. Remove the front bezel door, if necessary ("Removing the Front Bezel
(Tower Model)" on page 27).
4. Remove the access panel ("Removing Access Panel" on page 27).
5. Open the DIMM slot latches.