Appendix; Led Indicators - Vatech EZSensor User & Installation Manual

Appendix

A.1

LED Indicators

The EzSensor Hardware Controller has two LED indicators that show its functional status.
The location of the LED lights is as shown in the following illustration and described in Table 3.
<Table 3. Description of LED Indicators>
Operational State
Initial State
Standby
Trigger (X-ray On)
Data Transmission
with the USB PC interface cable
Image acquisition
LED State
LED 1 LED 2
Green Off
Green Green
Orange Green
Green Orange
Green Off
LED 1
LED 2
Functional Status
Confirmation
USB Connection
Capture standby
X-ray On and Sensor Trigger On
Confirm data transmission
with the sensor board
Completion of data transmission
(Return initial state)
43