Vatech EZSensor User & Installation Manual page 18

Step 3
Connect the USB PC Interface
cable connector to the USB
port on the PC.
Be sure to connect the USB
port on backside for
accurate operation.
Step 4
Confirmation of Driver installation at the Device Manager.
Method of Confirmation:
Windows 7 : Control Panel
Windows XP : Settings
Select „VH EzSensor-N x.x‟, located under Imaging Devices. You should see the message,
"This device is working properly".
16

System and Security
 
Control Panel System
 
System Device Manager
 
Hardware Device manager