Canon imagePASS-B2 Installation Procedure page 5

Installation Procedure
5) Hold the handle to remove Main Controller PCB 2.
• 2 Screws
x2
Grip
6) Remove the Face Cover. (Removed Face Cover is not used.)
• 2 Screws (Removed screws are not used.)
NOTE:
Ask the user to store the Face Cover and Screws, in case it is needed in the future.
x2
Installation Procedure
7) Remove the 2 screws (the removed screws are used in step 9)).
F-1-10
8) Remove the Bypass PCB (the removed Bypass PCB is not used).
• 2 Screws (the removed screws are not used)
F-1-11
x2
NOTE:
Ask the user to store the Bypass PCB and Screws, in case it is needed in the future.
x2
5
F-1-12
F-1-13
5