Module 3; Module 4; Module 5; Module 6 - Tannoy QFLEX 64 Mounting And Installation Manual

3. Fixing the QFlex 64 to the bracket

3.1.3 Module 3

Follow the procedures in 3.1.1 for module 3 using mounting block 3 and 4.

3.1.4 Module 4

Fig .7 Fig .8 Fig .9
Module 4 does not have the mounting
dowels and attaches directly to module
3 and 5 using the joining plates.
(as shown in Fig .7)

3.1.5 Module 5

Follow the procedures in 3.1.1 for
module 5 using mounting block
5 and 6. (as shown in Fig .8)

3.1.6 Module 6

Follow the procedures in 3.1.1 for
module 6 using mounting block 7.
(as shown in Fig .9)

3.2 Securing

Once the column has been angled all lock nuts can be fully tightened. Max torque 22 Nm.
For audio and data connections please refer to the QFlex manual which can be found at www.tannoypro.com
7
QFLEX 64 Mounting and Installation Guide rev 1.1.0