16. ADJUSTMENT AND SAFETY DEVICES
Limit thermostat
circuit overheats.
NTC fumes sensor
heating.
Flame ionisation detector
these conditions, the boiler blocks.
Pump post-circulation
thermostat causes the main burner to go out.
Anti-block pump function
operate for 10 seconds.
heating circuit.
In case of a heat demand in the heating mode, the appliance can pre-circulate the pump before the burner is ignited. This pre-
17. PUMP CAPACITY/ HEAD
KEY TO PUMP CHARTS - "SECTION" E
Q
WATER FLOW RATE
H
HEAD
7219624.01 (1-04/15)
MIN
Minimum speed of modulation
MAX
Maximum speed of modulation
40