Toshiba MW24FN3 Service Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV DVD Combo
  5. MW24FN3
  6. Service manual
Toshiba MW24FN3 Service Manual

Toshiba MW24FN3 Service Manual

Color television/video cassette recorder/dvd video player
Hide thumbs Also See for MW24FN3:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
FILE NO. 140-200317

SERVICE MANUAL

COLOR TELEVISION/
VIDEO CASSETTE RECORDER/
DVD VIDEO PLAYER
MW24FN3
DOCUMENT CREATED IN JAPAN, May, 2003

Advertisement

Table of Contents
loading

Related Manuals for Toshiba MW24FN3

Summary of Contents for Toshiba MW24FN3

  • Page 1: Service Manual

    FILE NO. 140-200317 SERVICE MANUAL COLOR TELEVISION/ VIDEO CASSETTE RECORDER/ DVD VIDEO PLAYER MW24FN3 DOCUMENT CREATED IN JAPAN, May, 2003...
  • Page 2 CAUTION THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 3: Servicing Notices On Checking

    SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, Safety is secured against an X-ray by consider- they are indicated with the labels or seals on the ing about the cathode-ray tube and the high cabinet, chassis and parts.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
  • Page 5 IMPORTANT SAFEGUARDS (CONTINUED) DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the unit. If the unit has been exposed to rain or water.

  • Page 6: Tape Removal Methodatno Power Supply

    TAPE REMOVAL METHOD AT NO POWER SUPPLY Remove the TV/DVD/VCR block from the main unit and the Fig. 1 below can be seen. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) Remove the screw 1 of the Deck Chassis and remove the Loading Motor. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.

  • Page 7: Parental Control-Rating Level

    PARENTAL CONTROL - RATING LEVEL 4 DIGIT PASSWORD CANCELLATION If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. Turn Unit ON and set the DVD mode. Check that the “No disk” is displayed on the screen. Press and hold the 'STOP(DVD)' button on the front panel.

  • Page 8: Table Of Contents

    TABLE OF CONTENTS CAUTION ..........................A1-1 SERVICING NOTICES ON CHECKING .................. A1-2 HOW TO ORDER PARTS ....................... A1-2 IMPORTANT WARNING ......................A1-3, A1-4 TAPE REMOVAL METHODATNO POWER SUPPLY ............A1-5 DISC REMOVAL METHODATNO POWER SUPPLY ............A1-5 PARENTAL CONTROL-RATING LEVEL ................A1-6 TRAY LOCK ..........................
  • Page 9 GENERAL SPECIFICATIONS CRT Size / Visual Size 24 inch / 600mmV System CRT Type Flat Deflection degree Magnetic Field BV/BH + 0.45 G / 0.18 G Color System NTSC Speaker 2 Speaker Position Front Size 1.8 x 3.9 Inch Impedance Sound Output 1.5W + 1.5W 10%(Typical)
  • Page 10 GENERAL SPECIFICATIONS Signal Video Signal Input Level 1 V p-p/75 ohm Output Level 1 V p-p/75 ohm S/N Ratio (Weighted) at DVD Mode 65dB S/N Ratio (Weighted) at VCR Mode 50dB Horizontal Resolution at DVD Mode 400 Lines Horizontal Resolution at VCR(SP)Mode 220 Lines RGB Signal Output Level...
  • Page 11 GENERAL SPECIFICATIONS G-10 On Screen Menu Display Menu Type Character (TV/VCR) Timer Rec Set Channel Setup TV/CATV Auto CH Memory Add/ Delete Guide CH Set TV Setup V-chip Set On/Off Timer Set Picture Audio Surround Stable Sound Sap On/Off Auto Repeat On/Off System Setup Clock Set Yes (Calendar 12h)
  • Page 12 GENERAL SPECIFICATIONS G-11 On Screen Menu Display Menu Type Character (DVD) Language OSD Language Menu SubTitle Audio Picture TV Screen Size OSD Display On/Off Sound DRC (Dynamic Range Control) dts Decode Output(5.1ch/ 2ch) Surround On/Off Center On/Off Sub Woofer On/Off Parental Password Lock/ Un Lock Rating Level...
  • Page 13 GENERAL SPECIFICATIONS G-14 Remote Unit(for TOSHIBA) RC-FG Control Glow in Dark Remocon Unit Format Custom Code 40-BFh,44-BBh Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys Keys TV/VCR Power Channel- Channel+ Volume- Volume+ Display Sleep Audio Select...

  • Page 14: Tray Lock

    GENERAL SPECIFICATIONS G-15 Features Auto Head Cleaning Auto Tracking HQ (VHS Standard High Quality) Auto Power On, Auto Play, Auto Rewind, Auto Eject VIDEO PLUS+(SHOWVIEW,G-CODE) Auto Clock Forward / Reverse Picture Search Auto CH Memory Surround Stable Sound Closed Caption TV Auto Shut off Function End Call Index Search...
  • Page 15 GENERAL SPECIFICATIONS G-17 Interface Switch Front Power (Tact) Channel Up Channel Down Volume Up Volume Down Play (VCR) Stop / Eject (VCR) F.FWD/Cue (VCR) Rew/Rev (VCR) REC/OTR (VCR) Play (DVD) Stop (DVD) Skip+ /Search+ (DVD) Skip- /Search- (DVD) Open/Close (DVD) Input Select Main Power SW Indicator...

  • Page 16: Disassembly Instructions

    DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: TV/DVD/VCR BLOCK (Refer to Fig. 1-3) Remove the 2 screws 1. AND P.C. BOARDS Disconnect the following connectors: 1-1: BACK CABINET (Refer to Fig. 1-1) (CP303, CP404 and CP1704). Remove the 6 screws 1. Remove the TV/DVD/VCR Block in the direction of arrow.
  • Page 17 DISASSEMBLY INSTRUCTIONS 1-5: VCR PCB (Refer to Fig. 1-5) 1-7: DVD PCB/DVD DECK (Refer to Fig. 1-7) Remove the 6 screws 1. Make the short circuit on the position as shown Fig. 1-7 Remove the screw 2. using a soldering. If you remove the DVD Deck with no Remove the AV Jack Shield.

  • Page 18: Removal Of Vcr Deck Parts

    DISASSEMBLY INSTRUCTIONS NOTE 2. REMOVAL OF VCR DECK PARTS In case of the Locker R installation, check if the one 2-1: TOP BRACKET (Refer to Fig. 2-1) position of Fig. 2-3-B are correctly locked. Extend the 2 supports 1. When you install the Cassette Side R, be sure to move Slide the 2 supports 2 and remove the Top Bracket.
  • Page 19 DISASSEMBLY INSTRUCTIONS 2-6: LOADING MOTOR/WORM (Refer to Fig. 2-6-A) 2-7: TENSION ASS’Y (Refer to Fig. 2-7-B) Remove the screw 1. Turn the Pinch Roller Cam clockwise so that the Tension Remove the Loading Motor. Holder hook is set to the position of Fig. 2-7-A to move Remove the Worm.
  • Page 20 DISASSEMBLY INSTRUCTIONS NOTE [OK] Tension Connect Take care not to damage the gears of the S Reel and T Reel. Tension Band The Polyslider Washer may be remained on the back of the reel. [NG] Tension Connect Tension Band Take care not to damage the shaft. Do not touch the section “A”...
  • Page 21 DISASSEMBLY INSTRUCTIONS 2-10: CASSETTE OPENER/PINCH ROLLER BLOCK/P5 ARM ASS’Y (Refer to Fig. 2-10-A) Unlock the support 1 and remove the Cassette Opener. Remove the Pinch Roller Block and P5 Arm Ass’y. Cassette Opener Spring Position Fig. 2-11-B Pinch Roller Block 2-12: FE HEAD (RECORDER ONLY) (Refer to Fig.
  • Page 22 DISASSEMBLY INSTRUCTIONS 2-14: CAPSTAN DD UNIT (Refer to Fig. 2-14-A) 2-15: MAIN CAM/PINCH ROLLER CAM/JOINT GEAR (Refer to Fig. 2-15-A) Remove the Capstan Belt. Remove the 3 screws 1. Remove the E-Ring 1, then remove the Main Cam. Remove the E-Ring 2, then remove the Pinch Roller Remove the Capstan DD Unit.
  • Page 23 DISASSEMBLY INSTRUCTIONS NOTE 2-18: CASSETTE GUIDE POST/INCLINED BASE S/T UNIT/P4 CAP (Refer to Fig. 2-18-A) 1. When you install the Loading Arm S Unit, Loading Arm T Unit and Main Loading Gear, align each marker. (Refer Remove the P4 Cap. Unlock the support 1 and remove the Cassette Guide to Fig.

  • Page 24: Removal Of Dvd Deck Parts

    DISASSEMBLY INSTRUCTIONS 3. REMOVAL OF DVD DECK PARTS Main Chassis Ass’y NOTE 1. Do not disassemble the DVD DECK PARTS except listed Rack Loading parts here. Minute adjustments are needed if the disas- semble is done. If the repair is needed except listed parts, replace the DVD MECHA ASS’Y.
  • Page 25 DISASSEMBLY INSTRUCTIONS NOTE Main Chassis Ass’y When installing the Clamper Magnet, install it with the green face up. When installing the wire of the Lever Switch, install it correctly as Fig. 3-4-B. When installing the Lever Switch, install it correctly as Traverse Holder Fig.
  • Page 26 DISASSEMBLY INSTRUCTIONS NOTE 3-9: GEAR (Refer to Fig. 3-9-A) Unlock the support 1. After the assembly of the Rack Feed, check if the Rack Feed 1/2 is moving smoothly. (Refer to Fig. 3-7-B) Remove the Middle Gear 1/2/3, Idler Gear and Feed Gear. In case of the Rack Feed Ass’y installation, install cor- rectly as Fig.
  • Page 27 DISASSEMBLY INSTRUCTIONS NOTE In case of the Idler Arm installation, install as the circled section of Fig. 3-10-B. In case of the Idler Arm Spring installation, install as the circled section of Fig. 3-10-C. In case of the Chassis Spring installation, install as the circled section of Fig.

  • Page 28: Removal Of Anode Cap

    DISASSEMBLY INSTRUCTIONS 4. REMOVAL OF ANODE CAP 3. After one side is removed, pull in the opposite direction to remove the other. Read the following NOTED items before starting work. NOTE After turning the power off there might still be a potential Take care not to damage the Rubber Cap.

  • Page 29: Removal And Installation Of Flat Package Ic

    DISASSEMBLY INSTRUCTIONS REMOVAL AND INSTALLATION OF FLAT When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using a PACKAGE IC tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 5-3.) REMOVAL NOTE Put the Masking Tape (cotton tape) around the Flat...
  • Page 30 DISASSEMBLY INSTRUCTIONS INSTALLATION When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thin-tip Take care of the polarity of new IC and then install the new Soldering Iron. (Refer to Fig. 5-8.) IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily.

  • Page 31: Key To Abbreviations

    KEY TO ABBREVIATIONS Audio/Control H.P.F High Pass Filter Automatic Color Control H.SW Head Switch Audio Erase Hertz Automatic Frequency Control Integrated Circuit Automatic Fine Tuning Intermediate Frequency AFT DET Automatic Fine Tuning Detect Indicator Automatic Gain Control Inverter Amplifier Killer Antenna Left A.PB...
  • Page 32 KEY TO ABBREVIATIONS Serial Strobe Switch SYNC Synchronization SYNC SEP Sync Separator, Separation Transistor TRAC Tracking TRICK PB Trick Playback Test Point UNREG Unregulated Volt Voltage Controlled Oscillator Video Intermediate Frequency Vertical Pulse, Voltage Display V.PB Video Playback Variable Resistor V.REC Video Recording Visual Search Fast Forward...

  • Page 33: Service Mode List

    SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter SERVICE MODE, unplug AC cord till lost actual clock time. Then press and hold Vol (-) button of main unit and remocon key simultaneously.

  • Page 34: Preventive Checks And Service Intervals

    PREVENTIVE CHECKS AND SERVICE INTERVALS The following standard table depends on environmental conditions and usage. Parts replacing time does not mean the life span for individual parts. Also, long term storage or misuse may cause transformation and aging of rubber parts. The following list means standard hours, so the checking hours depends on the conditions.
  • Page 35 PREVENTIVE CHECKS AND SERVICE INTERVALS CLEANING NOTE 2. TAPE RUNNING SYSTEM After cleaning the heads with isopropyl alcohol, do not When cleaning the tape transport system, use the run a tape until the heads dry completely. If the heads gauze moistened with isopropyl alcohol. are not completely dry and alcohol gets on the tape, 3.

  • Page 36: When Replacing Eeprom (Memory) Ic

    WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: Initial Data setting will not be possible if clock has been set. To reset clock, either unplug AC cord and allow at least 5 seconds before Power On.

  • Page 37: Servicing Fixtures And Tools

    SERVICING FIXTURES AND TOOLS Alignment Tape Back tension cassette gauge Torque cassette gauge Taper nut driver (KT-300NR) ST-N5 ST-NF 70909103 70909199 70909228 VTR cleaning kit VTR lubrication kit Grease JG002B Adapter JG002E Dial Torque Gauge (10~90gf•cm) JG002F (60~600gf•cm) JG022 Master Plane JG024A Reel Disk Height JG153 X Value Adjustment Tentelometer...

  • Page 38: Mechanical Adjustments

    MECHANICAL ADJUSTMENTS 1-2: CONFIRMATION AND ADJUSTMENT OF TENSION 1. CONFIRMATION AND ADJUSTMENT POST POSITION Read the following NOTES before starting work. Set to the PLAY mode. • Place an object which weighs between 450g~500g on the Adjust the adjusting section for the Tension Arm position Cassette Tape to keep it steady when you want to make so that the Tension Arm top is within the standard line of the tape run without the Cassette Holder.
  • Page 39 MECHANICAL ADJUSTMENTS 1-4: CONFIRMATION OF VSR TORQUE NOTE Install the Torque Gauge (JG002F) and Adapter (JG002B) If the torque is out of the range, replace the following parts. on the S Reel. Set to the Picture Search (Rewind) mode. Check item Replacement Part (Refer to Fig.1-4-B) Then, confirm that it indicates 120~180gf•cm.
  • Page 40 MECHANICAL ADJUSTMENTS 2-2: CONFIRMATION AND ADJUSTMENT OF AUDIO/ 2-3: TAPE RUNNING ADJUSTMENT CONTROL HEAD (X VALUE ADJUSTMENT) When the Tape Running Mechanism does not work well, Confirm and adjust the height of the Reel Disk. adjust the following items. (Refer to item 1-1) Confirm and adjust the position of the Tension Post.
  • Page 41 MECHANICAL ADJUSTMENTS 3. MECHANISM ADJUSTMENT PARTS LOCATION GUIDE 1. Tension Connect P4 Post 2. Tension Arm T Brake Spring 3. Guide Roller T Reel 4. Audio/Control Head S Reel 5. X value adjustment driver hole Adjusting section for the Tension Arm position D2-4...

  • Page 42: Electrical Adjustments

    ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL FUNCTION FUNCTION OSD H BRI MAX ADJUSTMENTS OSD C BRI MIN CUT OFF CONT CENT Read and perform these adjustments when repairing the H.POSI CONT MAX circuits or replacing electrical parts or PCB assemblies. H.BLK L CONT MIN H.BLK R COL CENT...
  • Page 43 ELECTRICAL ADJUSTMENTS (TV SECTION) 2-7: HORIZONTAL SIZE Receive the monoscope pattern. 2-2: CONSTANT VOLTAGE Using the remote control, set the brightness and contrast Set condition is AV MODE without signal. to normal position. Using the remote control, set the brightness and contrast Activate the adjustment mode display of Fig.
  • Page 44 ELECTRICAL ADJUSTMENTS 2-12: PARABOLA 2-16: BRIGHT CENTER Receive the crosshatch signal from the Pattern Generator. Receive the monoscope pattern. (RF Input) Using the remote control, set the brightness and contrast Using the remote control, set the brightness and contrast to normal position. to normal position.
  • Page 45 ELECTRICAL ADJUSTMENTS 2-18: COLOR CENTER 2-19: SUB CONTRAST MAX Receive the color bar pattern. (RF Input) Activate the adjustment mode display of Fig. 1-1 and Using the remote control, set the brightness, contrast, press the channel button (21) on the remote control to color and tint to normal position.

  • Page 46: Purity And Convergence

    ELECTRICAL ADJUSTMENTS PURITY AND CONVERGENCE 3-3: STATIC CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 3-2. NOTE Receive the crosshatch pattern from the color bar Turn the unit on and let it warm up for at least 30 generator. minutes before performing the following adjustments.
  • Page 47 ELECTRICAL ADJUSTMENTS 2. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CD002 AC IN CD1702 DEFLECTION PCB CP601 TP401 VCR DECK CP802A FB401 CP1704 DVD DECK CD604 CP8001 DVD DECK VR404 CP404 CP1702 CP303 VR1701 CP001 CP4502 SPEAKER CP4503 CRT PCB CP802B CP805 J801...
  • Page 48 DVD BLOCK DIAGRAM 64M SDRAM 8M FLASH 1M SRAM IC4012 IC4007 IC2003 M29W800DT70N6 MT48LC4M16A2TG-75 CY62128VLL-70ZC AD0-13 ADDR1~20, VCR BLOCK SRAM_DATA 0~7, SMI_DQMU/CLK/ F_OE/CE/WE/DQM0/RESET ADD0~16/ DQML/WE/CAS/ WEN/DQM RAS/CS0 MECHA BB_V4/IRQ0 VR-DVD/CD CVBS AFEC_EVALID/AFEC_SCTST LD-DVD/CD XPCLK/XBCLK/XDATA/XERROR LMD1/2 SLIDER_OUT/SLIDER_IN TR+/–, FO+/– Pick A, B, C, D, E, F PCM_DATA0/LRCLK/ RF_AMP/DSP AUDIO L...

  • Page 49: Y/C/Audio/Ccd/Head Amp

    Y/C/AUDIO/CCD/HEAD AMP BLOCK DIAGRAM X4501 3.579545MHz Q4507 Q4509 BUFFER Y/C/AUDIO/CCD/HEAD AMP IC BUFFER IC4501 LA71205M-MPB PULL VX01 Y/C_CS SERIAL MICON DRIVER CLAMP Y/C_DATA TIMMING DECODER Y/C_CLK H.SW DETAL FM-EQ EMPHA CLAMP CP4501 CONV C-LPF EP/LP-CH2 (L) Y-LPF EP/LP_COM EP/LP-CH1 (R) H.AMP YNR/ B-UP...

  • Page 50: In/Out

    MICON BLOCK DIAGRAM TV_POWER_H SYSCON/TIMER/SERVO IN/OUT IC101 OEC8074A VCR_A_MUTE VCR_POWER_H REGULATOR VCR_POWER_ON-H V.REC_ST_H Q114 VCR_A_MUTE TV_POWER_ON-H 56 POWER FAIL POWER_FAIL BUFFER HI-FI/ CVIN Q116 DEMODULATOR AV_SW1 AV_SW1 HIFI ENV 88 AV_SW HIFI_ENV COMB FILTER HIFI H.SW HIFI_H.SW AV_SW2 AV_SW2 ST SELECT ST_SELECT OSC0 X102...
  • Page 51 IN/OUT BLOCK DIAGRAM Q4202 Q4201 EXT_A_MUTE MUTE SW OPEN/CLOSE MUTE SW VCR_A_MUTE MICON EXT_MUTE STOP/EJECT VOL DOWN REAR OUT JACK Q4203 J4202 PLAY VOL UP MUTE SW SW_AUDIO_OUT_R SKIP Q4211 HEADPHONE JACK CH MUTE SW_AUDIO_OUT_L J2201 REC/OTR STOP SOUND AMP CH.DOWN PLAY KEY_A...
  • Page 52 CHROMA/IF BLOCK DIAGRAM CHROMA/IF_ IC IC601 PROTECT MICON LA76324M Y/C/AUDIO/ P.CON+5V V_SYNC CCD/HEAD AMP X601 Q602 OSD_ R 3.579545MHz PROTECT OSD_G OSD_B AT+5.7V REG REGULATOR OSD_Y 10V_REG. IC602 KIA78L10F-RTF MICON V_SYNC MOTOR+12V 8.5V REG P.CON+8V H.SYNC FROM TO CRT CP603 SW_C CUT OFF DIGITAL...
  • Page 53 SOUND AMP BLOCK DIAGRAM SOUND AMP IC IC352 AN7522N 12 4 SOUND +B SOUND_R+ SOUND_L+ IN/OUT SP_OUT_L SP_OUT_R SPEAKER SP351 SPEAKER SP352 TV_POWER_H TV_A_MUTE MICON 18 17 SURROUND-IC IC302 SW_AUDIO_OUT_R AN5891SA-E1V IN/OUT SW_AUDIO_OUT_L REGULATOR SW_AUDIO_OUT_L P.CON+8V DVD IN/OUT SW_AUDIO_OUT_R E-11 E-12...
  • Page 54 Hi-Fi/DEMODULATOR BLOCK DIAGRAM Hi-Fi AUDIO/H.AMP/DEM IC IC5501 AN3663FBP AUDIO_OUT_R AUDIO_OUT_L DVD IN/OUT DVD_A_OUT_R DVD_A_OUT_L INPUT SW FRONT_A_IN_R FRONT_A_IN_L IN/OUT REAR_A_IN_R REAR_A_IN_L HF_COM OUTPUT Y/C/AUDIO/CCD /HEAD AMP VCO-FO LOGIC DIGITAL TUNER_AUDIO COMB FILTER FM LIM Y/C_AUDIO NORMAL_A NOISE BLOCK REDUCTION V. REC_ST-H HIFI_ENV HIFI_H.SW MICON...
  • Page 55 DIGITAL COMB FILTER BLOCK DIAGRAM P.CON+5V P.CON+12V REGULATOR COMB_FSC Q1502 P.CON+8V BUFFER Y/C_VIDEO_Y CHROMA/IF AT+30V DIGITAL COMB FILTER SW_C IC1501 TC90A45F DVD_Y/C-C AV SW DVD IN/OUT IC1502 MM1501XNRE DVD_VIDEO Q1501 BUFFER Q1503 BUFFER AV SW IC1504 MM1501XNRE Y/C_VIDEO Y/C/AUDIO/ Y/C/AUDIO/ TUNER VIDEO CCD/HEAD AMP CCD/HEAD AMP...
  • Page 56 DVD IN/OUT BLOCK DIAGRAM AV SW1 DVD_RESET MICON CP8001 P.CON+9V P.CON+9V_D P.CON+D5V P.CON+5V_D REGULATOR P.CON+3.3V P.CON+3.3V P.CON+3.3V P.CON+12V SPDIF-134 ZERO IN/OUT SPDIF-134 AUDIO SW IC8001 MM1501XNRE AUDIO_OUT_L Q8006, Q8007 AUDIO_OUT_R HI-FI/DEMODU ZERO MUTE LATOR DVD_A_OUT_L DVD_A_OUT_R CP8002 AUDIO SW MIXER DVD_RESET IC8002 MM1501XNRE IC8004 NJM4580M...
  • Page 57 REGULATOR BLOCK DIAGRAM Q3003 AT+5V OUT AT+5V Q3014 BACKUP+5V BACKUP+5V DVD_H MICON AT+12V VCR_POWER_H P.CON+5V_A P.CON+5V_A OUT P.CON+5V OUT P.CON+5V_D OUT P.CON+9V_D OUT P.CON+5V_C IC3004 IC3002 IC3003 IC3001 KIA278R05PI KIA278R05PI KIA278R05PI KIA278R09PI P.CON+5V IN/OUT AT+5V P.CON+8V Q3001 UNREG+8V BUFFER P.CON+5V_A MOTOR+12V HI-FI/DEMODULATOR P.CON+12V...

  • Page 58: Tv Block Diagram

    TV BLOCK DIAGRAM MOTOR+12V Q1702 REGULATOR RELAY DRIVER UNREG+8V UNREG+5V DEGAUSS RELAY RY1701 DEGAUSS_H MICON L1703 DEGAUSS COIL D1705, D1706 D1710, D1711 Q406 AC IN TRANSFORMER CURRENT SWITCHING F1701 T1701 FEED BACK SWITCHING FEED BACK IC1702 IC1701 KIA431A-AT PS2561L1-1-V(W) Q1705 SWITCHING SOUND +B SOUND AMP...

  • Page 59: Printed Circuit Boards

    PRINTED CIRCUIT BOARDS DVD (TOP SIDE) DVD (BOTTOM SIDE) C8530 C4053 C4052 W861 B8503 R4128 R4119 C4056 C4061 R4124 Q4001 Q4002 IC4007 W818 W838 R4118 W837 R4144 R4120 R4123 Q8503 R8506 X4001 R4146 R4125 C4027 C4028 R4017 C4024 C4023 C4025 Q8502 C4019 IC4003...

  • Page 60: Vcr

    PRINTED CIRCUIT BOARDS VCR (INSERTED PARTS) SOLDER SIDE D106 R353 R4219 R359 R8012 W058 R356 W844 HS351 CP2201 CP601 S010 S801Y IC352 W006 W816 D4207 CP8002 W820 S810 TO VCR DECK L301 R311 W173 W105 L1505 R635 D1732 W050 W284 C321 W049 R2224...
  • Page 61 PRINTED CIRCUIT BOARDS VCR (CHIP MOUNTED PARTS) SOLDER SIDE W858 W865 IC8001 IC1504 W866 W872 R5508 R5502 IC8002 W346 IC8004 W347 R8051 R8023 R8056 W893 R8027 R123 R4504 R4513 R176 Q4507 Q4509 S807Y Q116 R4526 R4529 Q102 Q106 R4550 R4553 Q4511 R4527 R103 R4531...

  • Page 62: Deflection/Crt/Operation

    PRINTED CIRCUIT BOARDS DEFLECTION/CRT/OPERATION SOLDER SIDE HS401 W818 D415 W804 R414 W017 B403 C408 C418_2 CC801 D406 D405 C417_1 W837 R412 R807 W833 Q805 L401 W832 R2256 L402 R808 D801 R810 Q803 W834 L403 C449 R806 Q807 Q804 R2255 R815 R805 R452 D802...

  • Page 63: Relay/Sw

    PRINTED CIRCUIT BOARDS FG (CHIP MOUNTED PARTS) RELAY/SW (CHIP MOUNTED PARTS) RELAY/SW (INSERTED PARTS) SOLDER SIDE SOLDER SIDE SOLDER SIDE SW102 CP101 S1001Y S1003Y S1002Y F-10...

  • Page 64: Rf_Amp/Dsp

    RF_AMP/DSP SCHEMATIC DIAGRAM (DVD PCB) R2034 CD2001 2H0O2303 W857 C2006 JG2004 FFC(230mm) JG2001 JG2002 56P CH R2033 R2074 JG2027 JG2028 JG2029 R2031 R2073 FROM/TO LOADER C2008 B2005 CP2001 24FLZ-SM1-TB 18P CH FCM2012H-102T04 W813 W803 R2010 DVD_LD_CTL W811 6.8K Q2001 R2028 R2032 W802 2SA1036K...
  • Page 65 MOTOR DRIVE SCHEMATIC DIAGRAM (DVD PCB) P.CON+A5V D_GND C2307_1 FROM/TO RF_AMP/DSP MOTOR DRIVE IC IC2301 LA6560 OPN_SW S-GND DMUTE SPD_FG VCONT CLS_SW C2308 DMUTE VCC2 MUTE R2319 C2322 REFDAC VLD- VIN4 R2328 VLD+ VIN4- VD4+ VIN4+ C2314 W836 VD4- VREF-IN FROM/TO LOADER P.CON+3.3V_1 0.1 F...
  • Page 66 MPEG SCHEMATIC DIAGRAM (DVD PCB) L4003 22uH 0305 R4138 TRST FROM/TO MEMORY R4139 CLOCK GENERATOR IC R4140 IC4003 SN74AHCU04PWR R4141 R4142 F_CE F_WE/DQM0 F_OE JG4036 DATA0 JG4035 JG4034 DATA1 JG4037 R4125 DATA2 JG4026 DATA3 JG4020 C4003 DATA4 R4117 DATA5 K_MCLK JG4029 0.1 B DATA6...
  • Page 67 MEMORY SCHEMATIC DIAGRAM (DVD PCB) 64M SDRAM IC IC4007 MT48LC4M16A2TG-75 FLASH IC C4056 IC4012 M29W800DT70N6 0.1 F ADDR17 ADDR16 DQ15 DQ15 C4061 ADDR15 BYTE VSSQ VDDQ 0.1 F FROM/TO MPEG ADDR14 DQ14 DQ14 F_CE F_WE/DQM0 DATA15 ADDR13 DQ13 DQ15/A-1 F_OE DQ13 DATA0 C4052...
  • Page 68 AUDIO/VIDEO SCHEMATIC DIAGRAM (DVD PCB) FROM/TO REGULATOR2 D_GND B8501 VCC+9V FCM2012H-102T04 P.CON+5V P.CON+3.3V W839 Y_OUT C8504 22P CH BUFFER L8501 R8505 Q8501 KTA1504S_Y_RTK 2.2uH 0305 C8515 W844 C_OUT 22P CH BUFFER L8502 R8520 Q8502 CHROMA KTA1504S_Y_RTK 2.2uH 0305 FROM/TO MPEG CHROMA CVBS C8516...
  • Page 69 REGULATOR2 SCHEMATIC DIAGRAM (DVD PCB) D8510 MCL4148 W825 LEVEL CONVERT Q8505 KTC3875S_Y_RTK FROM/TO DVD IN/OUT 200mm CD8505 (CP8001) TO MOTOR DRV CU2B3301 M_GND L8509 P.CON+9V P.CON+9V L8507 2.2uH P.CON+A5V P.CON+D5V 0305 2.2uH 0305 B8505 P.CON+3.3V W871 W4BRH3.5X6X1.0X2 P.CON+3.3V W870 D_GND SPDIF P.CON+3.3V SPDIF-134...
  • Page 70 Y/C/AUDIO/CCD/HEAD AMP SCHEMATIC DIAGRAM (VCR PCB) BUFFER Q4507 2SC2412K R4537 1.8K FROM REGULATOR1 1/4W S808X S808Y P.CON+8V W864 P.CON+5V_A FROM/TO HI-FI/DEMODULATOR NORMAL_A FROM/TO MICON C4558 Y/C_AUDIO C4555 6.3V Y/C_CLK R4544 0.1 B C4561 Y/C_DATA HF_COM Y/C_CS 680K 0.01 B Y/C/AUDIO/CCD/HEAD AMP IC H.SW IC4501 C4559...
  • Page 71 MICON SCHEMATIC DIAGRAM (VCR PCB) BACKUP+5V FROM/TO REGULATOR1 C133 BACKUP+5V C148 C151 AT+5V 0.1 B DVD_H 68P CH 0.1 F C121 VCR_POWER_H 390P CH AT+12V C167 P.CON+5V_C P.CON+5V_A 47P CH R177 2.2K MOTOR_GND R129 C126 C125 FROM/TO DVD IN/OUT 0.1 B FROM/TO Y/C/A/HEAD AMP NC NC NC NC...
  • Page 72 IN/OUT SCHEMATIC DIAGRAM (VCR PCB) FROM CRT/OPERATION CP2201 (CD2251) A2001WV2-2P KEY_B KEY-B FROM/TO SOUND AMP POWER_LED_SW SW_AUDIO_OUT_L Q2202 SW_AUDIO_OUT_R KRC102SRTK T-REC LED SW SOUND_R+ Q2203 SOUND_L+ KRC102SRTK SP_OUT_R SP_OUT_L B8001 C8010 R8004 REC LED SW W4BRH3.5X6X1.0X2 0.1 F Q2201 KRC102SRTK REC_LED COAXIAL J8007...
  • Page 73 CHROMA/IF SCHEMATIC DIAGRAM (VCR PCB) FROM/TO REGULATOR1 P.CON+5V P.CON+8V AT5.7VREG 8.5VREG MOTOR+12V FROM/TO DIGITAL COMB FILTER Y/C_VIDEO-Y COMB_FSC SW_C R625 FROM DVD IN/OUT R620 DVD_Y/C-Y 4.7M TO Y/C/A/HEAD AMP V.SYNC C628 CHROMA/IF_IC IC601 NC 2.6 0.47 B LA76324M 4.97 FROM/TO DEFLECTION R602 1/4W CP602...
  • Page 74 SOUND AMP/SURROUND SCHEMATIC DIAGRAM (VCR PCB) SOUND AMP IC IC352 AN7522N R357 HS351 763WAA0254 C358 FROM/TO IN/OUT C302 0.0056 B SW_AUDIO_OUT_L C331 0.0056 B SW_AUDIO_OUT_R W843 FROM TV POWER SOUND_R+ SOUND_L+ R356 SP_OUT_R SOUND+B C321 100K 1/4W SP_OUT_L 2200 SOUND_GND R301 5.6K C324...
  • Page 75 Hi-Fi/DEMODULATOR SCHEMATIC DIAGRAM (VCR PCB) C5511 0.1 B C5507 R5504 3.3K 0.22 FROM IN/OUT FRONT_A_IN_R R5523 FRONT_A_IN_L HI-FI/AUDIO/HEAD AMP/DEM IC C5504 REAR_A_IN_R IC5501 AN3663FBP REAR_A_IN_L 0.1 B R5503 3.9M C5505_1 FROM DIGITAL COMB FILTER C5509 C5550 0.015 B DEM_BLK ZZ-PROM LOGIC C5551 C5513...
  • Page 76 DIGITAL COMB FILTER SCHEMATIC DIAGRAM (VCR PCB) C1511 0.47 B W820 P.CON+5V C1518 TO HI-FI/DEMODULATOR 6.3V TUNER_AUDIO C1519 0.1 B FROM/TO CHROMA/IF SW_C COMB_FSC BUFFER C1521 R1513 Q1503 Y/C_VIDEO KTC3875S_Y_RTK KANP Y/C_VIDEO-Y C1504 0.01 B COMB_FSC FROM/TO Y/C/A/HEAD AMP Y/C_VIDEO AUX_V[F/R] L1504 TUNER_VIDEO...
  • Page 77 DVD IN/OUT SCHEMATIC DIAGRAM (VCR PCB) FROM/TO SOUND AMP FROM/TO REGULATOR2 SW_AUDIO_OUT_L CP8001 (CD8505) A2001WV2-11P AV_SW1 SW_AUDIO_OUT_R W844 C8001 AUDIO_OUT_L W816 C8019 S801X S801Y 56P CH P.CON+9V_DH P.CON+9V P.CON+5V_D P.CON+D5V P.CON+3.3V P.CON+3.3V AUDIO SW IC IC8001 MM1501XNRE P.CON+3.3V TO IN/OUT Vin1 SPDIF-134 SPDIF-134...
  • Page 78 REGULATOR SCHEMATIC DIAGRAM FROM/TO TV POWER (VCR PCB) P.CON+12V MOTOR+12V UNREG+8V UNREG+5V P.CON+5V_A OUT IC R3001 D3005 AT5.7VREG AT+5V OUT IC3003 KIA278R05PI Q3003 1/4W 11EQS04N KTC3209_Y TO DIGITAL COMB FILTER P.CON+5V BACKUP+5V P.CON+12V Q3014 C3005 P.CON+8V KTC3209_Y VCR_POWER_H BUFFER 6.3V R3015 Q3015 C3002...
  • Page 79 TV POWER SCHEMATIC DIAGRAM (VCR PCB) FROM/TO MICON POWER_FAIL DEGAUSS_H MOTOR_GND B1703 D1702 W4BRH3.5X6X1.0 RELAY DRIVE 1SS133 Q1702 D1719_1 10.9 KTC3198 TO SOUND AMP R1708 SB340L-6737 SOUND+B SOUND_GND (S811) RY1701 ALKS321 TO CHROMA/IF C1723 MOTOR_GND 680P B1704 A1561WV2-2P CP1704 FCM2012H-102T04 C1719 MOTOR+12V TH1701...
  • Page 80 DEFLECTION SCHEMATIC DIAGRAM (DEFLECTION MT PCB) V.OUTPUT IC IC401 LA78041 THERMAL PROTECTION PUMP UP 25.0 12.0 25.0 R418 1K 1/4W R413 6.8K 1/4W R424 FROM/TO DY R432 18K +-1% 18K 1/4W S804 CP404_1 V801 B06B-DVS A60LVY196X11(O) TO DVD DECK L402 HS402 W812 763WAA0181...
  • Page 81 CRT/OPERATION SCHEMATIC DIAGRAM (CRT PCB) TP802 R814 12K 2W R822 2.7K 1/4W RED AMP Q802 123.5 R805 KTC4217 560 1/4W D802 1SS133 RED AMP Q803 W832 KTC3199_Y R806 FROM CROMA/IF 1K 1/4W CP603B (CP603) D805 C815 A2001WV2-8P W831 CUT OFF 1SS133 680P CH TP801...
  • Page 82 SW/RELAY/FG SCHEMATIC DIAGRAM M2002 M2001 BCD3B02 JCL9B61 PCB640 VEBA17 SW1AB-271-10A IMSA-9615S-08C-PP SLD.MTR(-) SLD.MTR(+) SP.MTR(-) SP.MTR(+) S1005X S1005Y S1005 L.SW S1004X S1004Y S1004 S1001X S1001Y S1001 S1003X S1003Y S1003 PCB68A S1002X S1002Y S1002 VEBA12 PCB690 SG-107F6 VEBA13 G-37 G-38...
  • Page 83 INTERCONNECTION DIAGRAM DVD PCB CD2001 CP2001 PCB130 VMB283 CD8505 CP8001 MON(DVD) MON(DVD) NC(SW) NC(SW) DRIVE DM-2 VOL(DVD) VOL(DVD) GND(M) GND(M) GND(DVD) GND(DVD) OPERATION PCB P.CON+9V P.CON+9V PCB270 LD(DVD) LD(DVD) TECB10 P.CON+5V P.CON+5V LD(CD) LD(CD) FULL ERASE HEAD ASS’Y P.CON+3.3V P.CON+3.3V VOL(CD) VOL(CD) COMMAND TRANSMITTER...

  • Page 84: Motor Drive

    WAVEFORMS Y/C/AUDIO/CCD HEAD AMP RF_AMP/DSP 100ns 10µs 20µs 100mV 100mV 1.0V 2µs 20ns 10µs 1.0V 200mV 200mV MOTOR DRIVE 500µs 1.0V 1.0V 500mV MPEG 20ns 500µs 2.0V 500mV 500mV AUDIO/VIDEO REGULATOR 2 REGULATOR 2 100ns 10µs 20µs 500mV 200mV NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.

  • Page 85: Micon

    WAVEFORMS MICON DEFLECTION DEFLECTION 20µs 20ms 10ms 200V 2.0V MICON 10ms 2.0V 50µs 2.0V SOUND AMP/SURROUND 10ms 50µs 2.0V 200mV DVD IN/OUT DEFLECTION 10ms 50µs 2.0V 0.5V 5.0V Hi-Fi/DEMODULATOR CHROMA/IF 20µs 2.0V 0.5V 1.0V NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.

  • Page 86: Waveforms

    WAVEFORMS DIGITAL COMB FILTER CRT/OPERATION 20µs 20µs 20µs 0.5V 1.0V 20µs 0.5ms 20µs 0.5V 1.0V CHROMA/IF 20µs 20µs 10ms 0.5V 1.0V 0.5µs 50µs 100mV 0.5V 20µs 50µs 1.0V 2.0V NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.

  • Page 87: Mechanical Exploded Views

    MECHANICAL EXPLODED VIEW 102B 102B 102A 102B PCB110 (CRT PCB ASS'Y) 101B 101I 101I 101F 101H 101C 101D 101G 101E 101A I1-1...
  • Page 88 MECHANICAL EXPLODED VIEW PCB010 (VCR PCB ASS'Y) PCB130 (DVD PCB ASS'Y) PCB270 (OPERATION PCB ASS'Y) PCB080 (DEFLECTION PCB ASS'Y) I1-2...

  • Page 89: Chassis Exploded Views

    CHASSIS EXPLODED VIEW (TOP VIEW) CD1501 M2003 UN4001 H5002 H5001 CD1502 M101 NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. I2-1...
  • Page 90 CHASSIS EXPLODED VIEW (BOTTOM VIEW) M2001 CD1501 CD1502 NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. I2-2...

  • Page 91: Dvd Deck Exploded Views

    DVD DECK EXPLODED VIEW CD2302 Do not disassemble the parts further CD2001 more than this condition, because minute adjustments are needed. PCB640 (SW PCB ASS'Y) M2002 PCB68A (RELAY PCB ASS'Y) CD2301 NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section.

  • Page 92: Mechanical Replacement Parts List

    MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE000080 A5F202Z720 CABINET,FRONT ASSY 101A AE000172 701WPJ1218 CABINET,FRONT 101B AE000173 712WPJ0829 FLAP 101C BZ710665 713WPA0160 GUIDE,REMOCON 101D BZ710666 713WPA0195 GLASS,LED 101E AE000155 7235490021 BADGE,BRAND 101F BZ710667 735WPB0216 BUTTON,FRAME1 101G BZ710668 735WPB0217 BUTTON,FRAME2...
  • Page 93 MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description BZ710018 8107630804 SCREW,TAP TITE(S) BRAZIER AD301968 8107230404 SCREW,TAP TITE(S) BIND BZ710030 8110630804 SCREW,TAP TITE(P) BRAZIER BZ710240 8107230804 SCREW,TAP TITE(S) BIND BZ710337 8107930604 SCREW,CUP(S) AE000179 723000C217 SHEET,BAR CODE AD300432 791WHA0092 LAMIFILM,BAG BZ710687 792WHA0350...

  • Page 94: Chassis Replacement Parts List

    CHASSIS REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AD302086 A5F101H420A DECK ASSY A5F101H420A BZ710564 85OA400234 PINCH ROLLER BLOCK BZ710682 85OA500026 AHC ASS'Y BZ710193 85OP200290 BELT,CAPSTAN (S) BZ710515 85OP600581 WORM BZ710094 85OP500083 BASE,AC HEAD BZ710112 85OP800324 SPRING,AC HEAD BZ710516 85OA000459 MAIN CHASSIS ASS'Y...

  • Page 95: Dvd Deck Replacement Parts List

    DVD DECK REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE000167 A5F101H650 DVD MECHA ASSY A5F101H650 AD301822 92P100022A TRAVERSE HOLDER AD301823 92P100032A RACK,FEED 1 AD301824 92P100033A RACK,FEED 2 AD301825 92P100035A LEVER,RACK FEED AD301826 92P200006A INSULATOR(F) AD301827 92P200007A INSULATOR(R) AD301850 92P300008A SPRING,CHASSIS...

  • Page 96: Electrical Replacement Parts List

    ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description RESISTORS R312 AE000271 R002T4683J 68K OHM 1/4W ! R401 AD301014 R4X5T6472F R,METAL 4.7K OHM 1/6W ! R403 BZ210105 R4X5T6183F R,METAL 18K OHM 1/6W ! R405 AD300037 R4X5T6153F R,METAL 15K OHM 1/6W ! R406 BZ210280 R3X28A391J...
  • Page 97 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES D404 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 ! D405 AD300074 D2BFRS4FS0 DIODE,SILICON RS-4FS ! D406 AD300073 D2BFRU4AM0 DIODE,SILICON RU-4AM D407 BZ410063 D2WTAU02A0 DIODE,SILICON AU02A-EIC ! D408 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77 D410 BZ410043 D2WT011E10...
  • Page 98 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES D3011 BZ410010 D28T21DQN9 DIODE,SCHOTTKY 21DQ09N-TA2B1 D4201 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77 D4204 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D4205 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D4207 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D5501 BZ410012 D28TQS04N0 DIODE,SCHOTTKY 11EQS04N-TA1B2...
  • Page 99 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q406 BZ510004 TA3T016240 TRANSISTOR,SILICON 2SA1624-AA Q407 BZ510096 TNATB03005 COMPOUND TRANSISTOR KRC102MAT Q408 AD300674 TCAT032070 TRANSISTOR,SILICON KTC3207-AT Q409 BZ510004 TA3T016240 TRANSISTOR,SILICON 2SA1624-AA Q410 BZ510069 TCATC31980 TRANSISTOR,SILICON KTC3198-AT(Y,GR) Q601 BZ510020 TNYJB05001 COMPOUND TRANSISTOR DTC114EKAT146...
  • Page 100 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q8007 BZ510067 TNAAC05002 COMPOUND TRANSISTOR KRC103SRTK Q8501 BZ510108 TAAA1504SY TRANSISTOR,SILICON KTA1504S_Y_RTK Q8502 BZ510108 TAAA1504SY TRANSISTOR,SILICON KTA1504S_Y_RTK Q8503 BZ510108 TAAA1504SY TRANSISTOR,SILICON KTA1504S_Y_RTK Q8505 BZ510109 TCAA3875SY TRANSISTOR,SILICON KTC3875S_Y_RTK COILS &TRANSFORMERS L001 BZ310002 021673101K...
  • Page 101 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description SWITCHES SW2251 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2252 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2253 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2254 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2255 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2256 BZ612010 0504101T34 SWITCH,TACT EVQ21505R SW2257...
  • Page 102 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS CP2302 AD301795 069S230639 CONNECTOR PCB SIDE A2001WR2-3P CP4501 BZ614011 0697290620 CONNECTOR PCB SIDE TOC-C09X-A1 CP4502 BZ614050 069J760029 CONNECTOR PCB SIDE IMSA-9604S-06Z14 CP4503 AD301649 067U002019 WIRE HOLDER B2013H02-2P CP602B BZ614458 069S290629 CONNECTOR PCB SIDE...
  • Page 103 TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN...

Table of Contents