Philips sonicare elite e7000 Series Manual page 11

The Normal speed setting should be selected when the Sonicare is
used in clinical trials.
Battery charge indicator (specific models only)
C
If the battery charge of your Sonicare is low, you will hear 3 beeps
after you have brushed your teeth for 2 minutes and the charge
indicator LED will blink yellow for 30 seconds.
A low charge indication signifies that 3 or fewer 2-minute brushings
remain.
When not in use, keep the Sonicare in the charger to maintain a full
battery charge.
Multiple-LED charge indicator (specific models only)
When the handle is placed in the charger, the green charge
indicator LEDs will blink in a rising pattern as the battery charges.
The number of blinking LEDs indicates the level to which the
battery has been charged.
When the battery reaches full charge, the LEDs stop blinking and start
to burn continuously. About once a minute, the charge indicator LEDs
go out momentarily and then go back on.This indicates that the
battery is being maintained at full charge.The full charge indication will
persist until the handle is removed from the charger.
The blinking yellow LED indicates that fewer than 3 brushings remain.
Single-LED charge indicator (specific models only)
C
When the handle is placed in the charger, the charge indicator
LED will blink green as the battery charges.When the battery
reaches full charge, the charge indicator LED will burn green
continuously until the handle is removed from the charger.
When your Sonicare is switched on or off, the charge indicator LED
will blink yellow if the battery charge is low.
Luxury brush holder (specific models only)
C
Some Sonicare models come with a luxury brush holder.
ENGLISH
11