Recording
Setting disc protection
Start
Notes
• The Disc Protect setting is available only when a disc recorded in VR mode
is inserted.
• You can select only "Disc Protect ON
inserted.
To cancel the disc protection:
• Select "Disc Protect ON
• If you insert a disc protected with this unit, "Disc Protect ON
appear instead of "OFF
58
EN
To prevent accidental over-recording, editing or erasing
of recordings, you can protect them using the Setup
menu.
1
Insert a recordable disc.
In stop mode, press [SETUP].
2
Select "Disc" using [K / L], then press
[ENTER].
Disc menu will appear.
3
Select "Disc Protect OFF
then press [ENTER].
Confirmation window will appear.
4
Select "Yes" using [K / L], then press
[ENTER].
The disc is protected.
OFF" when a protected disc is
OFF" at step 3, then select "Yes".
ON".
Disc
Format
Finalise
Disc Protect OFF
ON
Disc Protect OFF
ON
Yes
No
Disc Protect ON
Yes
No
OFF" will
ON" using [K / L],
OFF