Rear Panel - Toshiba D-R160SB Owner's Manual

Rear Panel

1
IN
OUT
ANTENNA
6
1. ANTENNA IN jack
Connect to an antenna or cable.
2. AV2 (DECODER) socket
Connect to VCR, camcorder, or other Audio-Video
equipment.
Use a commercially available Scart cable.
3. COMPONENT VIDEO OUTPUT jacks
Connect to the component video input jacks on your
TV.
Use a commercially available Component Video
cable.
4. ANALOG AUDIO OUT jacks
Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
5. Mains cable
Connect to a standard AC outlet.
6. ANTENNA OUT jack
Connect to the Aerial jack on your TV, cable box or
direct broadcast system.
Use the supplied RF cable.
Notes
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the
unit.
• This unit does not have the RF modulator.
2 3
COMPONENT
AUDIO IN
VIDEO OUTPUT
( AV3 )
S-VIDEO
Y
IN ( AV3 )
OUT
AV2 ( DECODER )
P /C
B B
P /C
R R
AV1 ( TV )
7 8 9 10 11
4
ANALOG
AUDIO OUT
L L
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
R R
COAXIAL
7. AV1 (TV) socket
Connect to the Scart socket on your TV.
Use a commercially available Scart cable.
8. S-VIDEO OUT jack
Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
9. S-VIDEO IN (AV3) jack
Connect to the S-Video output jack on your VCR,
camcorder or other equipment.
Use a commercially available S-Video cable.
10. AUDIO IN (AV3) jacks
Connect to the audio output jacks on your VCR,
camcorder or other Audio-Video equipment.
Use a commercially available Audio cable.
11. DIGITAL AUDIO OUTPUT PCM/BITSTREAM
(COAXIAL) jack
Connect to an amplifier with a digital input jack such
as a Dolby Digital decoder or DTS decoder.
Use a commercially available Coaxial cable.
5
EN 15