pottery barn kids REGENCY Manual

PRE-ASSEMBLY:

Please read all instructions before beginning assembly.

For your safety and ease, assembly by two adults is recommended.

Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as

this will avoid damaging any parts during assembly. The shipping box provides an ideal work
surface.
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small

parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included.

Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.
The use of power tools for assembly is not recommended. Power tools can damage hardware or

split wood.

PARTS INCLUDED:

A – Top panel with drawer (x1)
B – Left side panel (x1)
C – Right side panel (x1)
D – Stretcher (x1)

HARDWARE ENCLOSED:

E– Allen Key 6x84x30mm (x1)
F- Allen Key with Ball tip 4x95x30mm (x1)
G – Allen Bolt 1/4"x25x13mm (x8)
Rev. Jan. 25 , 2013
pottery barn kids
REGENCY WRITING DESK
1