Table of Contents
Advertisement
A. Slot 1 (Card 1)
B. Slot 2 (Card 2)
Figure 4-3
Model 7015 programming channel assignments
4.3.2 Front panel control
Closing and opening channels
A multiplexer channel is closed from the front panel by sim-
ply keying in the CHANNEL assignment and pressing
CLOSE. For example, to close channel 36 (Input 6 of Bank
D) of a multiplexer card installed in slot 2, key in the follow-
ing channel list, and press CLOSE:
SELECT CHANNELS 2!36
The above closed channel can be opened by pressing OPEN
or OPEN ALL. The OPEN key opens only the channels spec-
ified in the channel list, and OPEN ALL opens all channels.
The following display is an example of a channel list that
consists of several channels:
SELECT CHANNELS 2!1, 2!3, 2!22-2!25
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1
2
3
1!1
1!2
1!3
1!4
1!11
1!12
1!13
1!14
1!21
1!22
1!23
1!24
1!31
1!32
1!33
1!34
1
2
3
2!1
2!2
2!3
2!4
2!11
2!12
2!13
2!14
2!21
2!22
2!23
2!24
2!31
2!32
2!33
2!34
Examples : 1!18 = Slot 1, Channel 18 (Input 8, Bank B)
2!36 = Slot 2, Channel 36 (Input 6, Bank D)
Note : For Model 7002 slots 3-10, substitute slot
number for first number in channel assignments.
4
5
6
7
1!5
1!6
1!7
1!15
1!16
1!17
1!25
1!26
1!27
1!35
1!36
1!37
4
5
6
7
2!5
2!6
2!7
2!15
2!16
2!17
2!25
2!26
2!27
2!35
2!36
2!37
Notice that channel entries are separated by commas (,). A
comma is inserted by pressing ENTER or the right cursor
key (
). The channel range is specified by using the hy-
phen (-) key to separate the range limits. Pressing CLOSE
will close all the channels specified in the channel list. Press-
ing OPEN (or OPEN ALL) will open the channels.
Scanning channels
Multiplexer channels are scanned by creating a scan list and
configuring the Model 7001 or Model 7002 to perform a
scan. The scan list is created in the same manner as a channel
list (see Closing and Opening Channels). However, the scan
list is specified from the "SCAN CHANNEL" display mode.
(The SCAN LIST key toggles between the channel list and
the scan list.) The following shows an example of a scan list:
SCAN CHANNELS 2!1, 2!3, 2!21-2!25
Operation
8
9
10
1!8
1!9
1!10
1!18
1!19
1!20
1!28
1!29
1!30
1!38
1!39
1!40
8
9
10
2!8
2!9
2!10
2!18
2!19
2!20
2!28
2!29
2!30
2!38
2!39
2!40
4-3
Advertisement
Table of Contents
