Table of Contents
Advertisement
Instructions Guide
DAB/DAB+ Radio
Press the 'Mode' button (Ref.5) to switch to DAB/DAB+ Radio. On
first use it will automatically scan all stations and save them, and
also synchronize the time and date of the station.
Fully extend the antenna (Ref.14) to ensure that the best signal
can be received before scanning.
If the unit hasn't automatically scanned or you would like to
rescan the available stations, press the 'Scan' button (Ref.4) and
then release. This would be advisable to repeat if you are having
trouble listening to particular stations.
By pressing the Scan button, the radio will scan for available
stations up the frequency band and store all stations that have
a good signal. After searching has finished it will automatically
play the first station stored.
To browse through all of stations that have been stored, use the
'Tuning/Enter/Play/Pause' dial (Ref.13) to scroll through. Once
you have found your desired station, press down the 'Tuning/
Enter/Play/Pause' dial (Ref.13) to confirm your choice.
When you turn on the radio again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
7
Advertisement
Table of Contents
