Instructions Guide; Basic Operation - MAJORITY COTTENHAM II Instruction Manual

Digital and fm radio with bluetooth
Hide thumbs Also See for COTTENHAM II:
Table of Contents

Advertisement

Instructions Guide

Basic Operation

Please note all (Ref.) refer to Page 1-3 Controls and Functions mapping guide.
Plug the connector into the back of the system via the DC IN
port (Ref.17) and the power supply into the mains.
Alternatively, you can use 4 x D batteries to make your radio
portable and take on the go. Simply insert these into the battery
compartment at the bottom of the unit (Ref.18).
Ensure the antenna is extended as far as possible so that you can
get the best signal you can. This will ensure that a great variety
of stations can be received.
Press the 'Standby' button (Ref.1) to turn the unit on. This should
take you straight to DAB/DAB+ radio mode and begin a scan for
available digital stations. If a scan does not automatically begin,
you will need to press the 'Scan' button (Ref.4). A scan will then
begin and tune into available stations.
When the scan is complete, the radio will begin to play the first
available DAB/DAB+ station. The time and date will also now be
set on the unit. To switch to FM or Bluetooth mode, press the
'Mode' button repeatedly (Ref.5).
Standby
To place the music system on/off standby, press the 'Standby'
button (Ref.1).
To turn off the radio off fully, switch it off at the mains. The cord
must be out of reach of children.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cot-dab-gry-2

Table of Contents