Pairing - W&H proxeo TWIST PL-40 H Instructions For Use Manual

Start-up
The foot control and handpiece drive are already paired when delivered!
If pairing is active: Status LED (green) flashes on the foot control.
> Both devices need to be in pairing mode for it to be possible to pair the handpiece drive and foot control.
> To activate the handpiece drive's pairing mode, place it in the vicinity of the foot control.
 Press the ON/OFF button on
the handpiece drive for
5 seconds.
LED flashing green: The
handpiece drive is in
pairing mode for
30 seconds.
 Use the stick to press the
pairing button on the foot
control for 3 seconds.

Pairing

After 3 seconds the
status LED switches from
flickering to flashing.
The foot control's pairing
mode is now activated.
Pairing successful.
LED green.
Pairing unsuccessful.
LED flashing alternately
orange. The LED goes out
after 10 seconds.
23