Cleaning The Burners; Cleaning The Teppan Yaki Plate - Miele HR1936 Operating Instructions Manual

Cleaning and care

Cleaning the burners

Do not clean the burner components
in the dishwasher!
 The burners should be dismantled
and then cleaned only by hand using
a solution of warm water and a little
washing-up liquid applied with a soft
sponge.
 Clean all non-removable parts of the
burners with a damp cloth.
 Clean the ignition electrodes carefully
with a well wrung-out cloth.
Do not let the ignition electrodes get
wet. If they get wet, they will not
spark.
 Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
The surface of the burner caps will
become more matt with time. This is
quite normal and does not indicate
damage to the material.

Cleaning the Teppan Yaki plate


Danger of burning!
Let the Teppan Yaki plate cool down
sufficiently before cleaning it.

Fire hazard!
Clean the grease collection tray after
every use of the Teppan Yaki plate.
 Loosen coarse soiling immediately
with a stainless steel spatula and
scrape fat and residues into the
grease collection tray.
 Remove excess fat with paper towel.
38
 Remove any soiling with a damp
sponge.
Stubborn soiling can be removed with
warm water and a little washing-up
liquid. Remove any washing-up liquid
residues from the Teppan Yaki plate
with a damp cloth and dry it with a
clean cloth or paper towel.
 Remove the grease collection tray
and empty it.
 Wash the grease collection tray in the
dishwasher.
 Rub a little vegetable oil onto the
Teppan Yaki plate after cleaning it.
 Replace the grease collection tray.