Door Bracket Mounting Instructions - PROSOURCEFIT Multi-Grip Pull-Up Bar Instruction Manual & Exercise Manual

DOOR BRACKET MOUNTING
INSTRUCTIONS (Optional)
Optionally, you can mount it in a doorway using the mounting instructions below.
If desired, you can mount your ProsourceFit Multi-Grip Pull-Up Bar using the Door
"J" Brackets. It is NOT required.
1. Center the Door "J" brackets above the back of the doorway. The brackets
should be 13.75 inches apart. Use a pencil to mark the drill holes.
2.
Drill holes using a 1/4 inch drill bit .
3. Place Wall Anchors A for both brackets.
4. Use Wall Screw B to attach the first Door "J" bracket to the wall. Repeat for the
second bracket.