Rear Panel - Native Instruments AUDIO 4 DJ User Manual

6.2 Rear Panel

1 - USB 2.0 Port
Connects the AUDIO 4 DJ to your computer. The USB 2.0 connection handles data trans-
mission and provides bus power to your AUDIO 4 DJ. This means you do not need an
external power supply.
2 - Inputs A & B
You can configure these inputs as 2 stereo pairs or 4 mono input channels.
3 - Outputs A & B
You can configure these outputs as 2 stereo pairs or 4 mono output channels.
4 - Ground Screw
Attach your turntable's grounding wire to this screw to eliminate hum induced by ground
loops from the audio signal.
1 - USB 2.0 Port 1 - USB 2.0 Port
2 - Inputs A & B 2 - Inputs A & B
3 - Outputs A & B 3 - Outputs A & B
4 - Ground Screw 4 - Ground Screw
AUDIO 4 DJ – 20