Important Notes - Native Instruments AUDIO 4 DJ User Manual

►
Do not place the AUDIO 4 DJ hardware in an unstable position where it might acci-
dentally fall to the ground.
►
Before moving the AUDIO 4 DJ hardware, remove all connected cables.
►
Never subject the unit to extreme temperatures (e.g. direct sunlight in an enclosed ve-
hicle or near a heat source), or high levels of vibration.
►
Do not use excessive force on the buttons, knobs, switches or connectors.
►
When cleaning the AUDIO 4 DJ hardware, use a soft, dry cloth. Do not use paint thin-
ner, solvents, cleaning fluids, or chemically-impregnated wiping cloths.

2.3 Important Notes

►
Disclaimer: NATIVE INSTRUMENTS GmbH cannot be held responsible for damage or
data loss caused by improper use of, or modification to, the AUDIO 4 DJ hardware or
software. It is your responsibility to back up data you don't want to lose.
►
Specifications subject to change: The information contained in this manual is believed
to be correct at the time of printing. However, NATIVE INSTRUMENTS reserves the
right to make changes to the specifications of software and hardware at any time
without notice or obligation to update existing units.
►
Nameplate location: The nameplate is located on the bottom of the AUDIO 4 DJ hard-
ware and lists the Production ID.
►
Disposal notice: Should this product become damaged beyond repair, or for some
other reason come to the end of its useful life, please observe all regulations of your
country that relate to the disposal of electronic products.
►
Copyright: © NATIVE INSTRUMENTS GmbH 2008. All rights reserved. This publica-
tion may not be reproduced in whole or in part, summarized, transmitted, transcribed,
stored in a retrieval system, or translated into any language, in any form or by any
means without the prior written permission of NATIVE INSTRUMENTS GmbH.
►
All product and company names are trademarks or registered trademarks of their re-
spective owners.
AUDIO 4 DJ – 6