Rear Panel - Native Instruments Audio 4 DJ User Manual

2.2 Rear Panel

1 - USB 2.0 Port
Connects the AUDIO 4 DJ to your computer. The USB 2.0 connection handles data trans-
mission and provides bus power to your AUDIO 4 DJ . This means you do not need an
external power supply.
2 - Inputs A & B
You can configure these inputs as 2 stereo pairs of input channels.
3 - Outputs A & B
You can configure these inputs as 2 stereo pairs of output channels.
4 - Ground Screw
Attach your turntable's grounding wire to this screw to eliminate hum induced by ground
loops from the audio signal.
Getting Started: AUDIO 4 DJ – 11