Native Instruments AUDIO 4 DJ User Manual page 31

8.1.2 Using the AUDIO 4 DJ in Mac OS X
►
Make sure the volume controls of the amplifier are down!
►
Click on Applications/Utilities/Audio MIDI Setup or open the "Audio MIDI Setup" from
the Dock.
►
In "Audio Devices", choose "Audio 4 DJ" as Default Output.
►
Click on Configure Speakers.
►
Choose Stream 2 (Channel 3 & 4) as output.
8.2 Using the AUDIO 4 DJ with a CD Player
►
Make sure the volume controls of the amplifier are down!
►
In the Settings Tool, choose Line as Input Mode.
►
Connect the RCA cable of your CD player to a free input pair of the AUDIO 4 DJ, e.g.
AUDIO 4 DJ (CH. A, In 1|2).
►
Put a CD in your CD-Player and start playing it.
8.3 Using the AUDIO 4 DJ with a Turntable
►
Make sure the volume controls of the amplifier are down!
►
In the Settings Tool, choose Phono as Input Mode.
►
Connect the RCA cable of your turntable to the input pair of channel A or B of the
AUDIO 4 DJ, e.g. AUDIO 4 DJ (CH. A, In 1|2).
►
Connect your turntable's ground wire to the AUDIO 4 DJ's ground screw.
►
Put a record on your turntable and start playing it.
AUDIO 4 DJ – 31