Advertisement
NOTE:
If you want to
adlust your keyboard
keyboard flap located on the back underside
keyboard connectors.
to
sit higher. pull down the
of the keyboard between the two
A42824
Inserting the Coiled Cable into the Keyboard
3
Turn the video display unit around
so
that you
face
the back of the
unit.
4
lnsert
the
RS
232
Cross cable
into the
serial
connector located on the rear
of the
base assembly
of the video display unit.
See
the following figure.
NOTE:
The RS-232
Cross cable
is used only
to
connect the first terminal to the
processing unit.
NOTE:
Make sure
to
screw
in the connector retaining
screws
after you insert
the
RS
232
Cross cable
to
secure
the connection.
KEYBOARD
CONNECTORS
15
November
1984
2-2t
Advertisement
