SAMXT User Guide V1.5
Saved parameters to flash...
OK
AT$ACCESS?
$ACCESS:
IPBLOCK: 1
REMOTEIP1: 10.64.24.2
REMOTEIP2:
REMOTEIP3:
REMOTEIP4:
SMSBLOCK: 1
REMOTESMS1: 0413586218
REMOTESMS2:
REMOTESMS3:
REMOTESMS4:
OK
AT$LGSMS
Use to program parameters for last gasp SMS.
Parameters are defined as:
LGSMSMSG=SMS message text, default is "SAMXT low power detected..."
Time delay to make sure supply power is down for this long before sending
LGSMSDELAY=
last gasp SMS
LGSMSNO=SMS phone number
AT$LGSMS= LGSMSMSG= SAMXT power supply is low....,60,LGSMSNO=+61418505361
Saved parameters to flash...
OK
AT$LGSMS?
$LGSMS:
22
Need help?
Do you have a question about the SAMXT and is the answer not in the manual?