Viewing Images On An External Monitor - Casio D'Z IMAGE DERMOCAMERA DZ-D100 User Manual

Viewing images on an external monitor

1.
Switch off the camera and use a third-party HDMI cable to connect the
camera to the external monitor.
• Use only HDMI cables (third-party) that carry
the logo shown at right.
• Switch the camera off before connecting or
disconnecting the cable. Configure the
external monitor as described in the manual for the monitor before connecting
or disconnecting the cable.
HDMI output (micro)
HDMI micro connector
2.
Switch the camera on.
The image displayed on the LCD monitor appears on the external monitor.
NOTE
• The HDMI cable used should be less than 3.0 m (9.8') long and should be shielded
and compatible with the HDMI high-speed specification (ver. 1.4).
• The external monitor used should be compliant with the IEC/UL/CSA/EN60950-1
or JIS C 6950-1, or with the VCCI-B, FCC-B or CE standard.
• The use of products that do not comply with the specified standards may result in
lowered resistance to external electromagnetic waves and/or an increase in
unwanted electromagnetic wave emissions.
• External monitors should be kept at least 1.5 m (4.9') away from the patient during
use.
• The touch panel cannot be used while an HDMI cable is connected.
HDMI
HDMI
connector
HDMI input
HDMI cable
(Less than 3.0 m (9.8'))
46
External monitor
Other Playback Functions