Knives Replacement Mod. Fr/D; Replacement Knives Mod. P-Fr/D And Sp-Fr/D - Galfre FR/D 165 Operator And Maintenance Manual

6.4.1 K
NIVES REPLACEMENT
In order to replace knives, let the disc rotate until the knife position
corresponds to the rear part of the cutter bar as shown in the picture.
Loosen the nut of the knife with a screwdriver.
Replace knives following the instructions given in the previous paragraph.
Replace knives bolts and nuts when they have been removed 4-5 times.
Fasteners (bolts, screw and nuts) must be of the type indicated by the
Manufacturer.
6.4.2 R
EPLACEMENT KNIVES
In order to replace knives, let the disc rotate until the knife position
corresponds to the hole on the front par of the cutter bar.
Loosen the nut of the knife with a screwdriver.
Replace knives following the instructions given in the previous paragraph.
Replace knives bolts and nuts when they have been removed 4-5 times.
Fasteners (bolts, screw and nuts) must be of the type indicated by the
Manufacturer.
Operator's and Maintenance Manual – Rotary Disc Mowers
M . FR/D
OD
M . P-FR/D
OD AND
Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
SP-FR/D
51