Storage; Disposal And Scrapping - Galfre FR/D 165 Operator And Maintenance Manual

2.7 STORAGE

If the machine is not used for a long period it is necessary to store it inside
to avoid exposure to weather and dust. Before operating it again, it is good
practice to clean the machine and lubricate all mechanical components to
prevent rust.
Clean the machine thoroughly;
-
Inspect the machine for damaged parts and scratched paint;
-
Make sure that safety signs are legible and located properly on the
-
machine. Replace damaged safety labels (see par. 3.2);
Replace damaged or worn curtain (see par. 6.5);
-
Lubricate all mechanical components, locking pins, the coupling head
-
to the cardan joint (see par. 6.1);
Replace oil in
-
instructions (see par. 6.2);
Loose transmission belt, if necessary (see par. 6.3);
-
If possible, store the machine inside and place it on a wooden pallet;
-

2.8 DISPOSAL AND SCRAPPING

The machine shall be scrapped in suitable dumps in compliance with the
existing law.
Collect used oil and dispose it according state and local regulations.
Used oil is harmful according to the existing law, therefore it shall be properly
collected. Contact the Oil Collection Centre. (In Italy - C.O.O.U. – Consorzio
Obbligatorio Oli Usati (Free number 800 863 048).
Collect properly plastics, aluminium and steel components for them to be
recycled.
Operator's and Maintenance Manual – Rotary Disc Mowers
the gearbox and in the cutter bar following the
Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
16