Attaching To The Three Point Linkage Of The Machine - Galfre FR/D 165 Operator And Maintenance Manual

4.4 ATTACHING TO THE THREE POINT LINKAGE OF THE MACHINE

All GALFRÈ snc MOWERS can be attached to any kind of tractor equipped
with universal three point linkage.
The area shall be properly lightened under conditions of reduced visibility.
Nobody shall be within 5 metres of hitching point.
To adjust the height of the "three point" remove the shear pin (A), position
the pin at the suitable height (1) or (2) and secure it with the shear pin.
Approach the tractor to the mower until the lifting bars and the three point
linkage of the machine are lined up and connect them with the pins.
Connect the three point to the upper hitch link and adjust length so that the
mower is parallel to the ground. Before attaching or detaching the mower
make sure that the control lever is properly positioned as to avoid
unintentional raising or lowering of the mower.
Insert and secure shear pins. Lock the safety device to
Operator's and Maintenance Manual – Rotary Disc Mowers
Insert and secure shear pins. Make sure that shear
pins are locked properly.
avoid loosening of the three point.
Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
ATTENTION!
ATTENTION!
31