Hydraulic System - Galfre FR/D 165 Operator And Maintenance Manual

4.4.2 H
YDRAULIC SYSTEM
Before connecting the hydraulic couplings (quick couplings) to the distributors
of the tractor stop engine and operate the distributors levels in both directions
in order to make sure that the circuits of the tractor and the machine are not
under pressure.
Check hydraulic hoses for wear and scratches after every operation and
replace them with new ones provided by the Manufacturer if necessary.
If there is a leak stop the engine of the tractor, disengage
relieve pressure in the hydraulic system, disconnect hydraulic hoses using
safety gloves (make sure you have a bin to collect used oil ) and replace them
with new ones supplied by the Manufacturer. Used oil is harmful according to
the existing law, therefore it shall be collected properly.
Fluids under pressure such as oil in an hydraulic system can cause severe
injury and infections. Seek medical assistance if necessary.
Make sure that all couplings are clean and in good conditions before
connecting the quick hydraulic hoses to the tractor.
After mowing place hydraulic hoses in their
brackets.
Operator's and Maintenance Manual – Rotary Disc Mowers
Make sure that all hydraulic hoses are
installed properly.
Check wear on hydraulic hoses and replace
them if necessary (anyway at least every 6
years).
The hydraulic cylinder is supplied without oil.
Fill the hydraulic system and drive at least twice to
the right and to the left respectively to check proper
connection of the system.
Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
ATTENTION!
power takeoff,
35