Table of Contents
Advertisement
6. STARTING PROCEDURE
NOTE
This machine is shipped without fuel and oil.
It is essential that fuel and oil levels are checked and maintained before each operation.
ALWAYS check the fuel and oil level with the machine on flat level ground.
CAUTION
FOR OUTDOOR USE ONLY
This machine produces carbon monoxide – a poisonous, colourless and odourless
gas that can cause death or serious injury.
ELECTRIC START
5.24
Make sure the water pump is on a flat stable surface.
5.25
Make sure the water pump has been filled with both fuel and oil to the correct levels.
Turn the fuel tap (1) to the 'ON' position.
5.26
5.27
Unscrew the STOP/RUN lever (3) and move it to the RUN position, then lock it in
position by tightening the screw.
5.28
Turn the key switch (4) in a clockwise direction against the spring tension.
5.29
Once the engine has started, release the key.
5.30
Adjust the water pump speed to the desired working speed by moving the STOP/RUN
lever to suit the load.
16
Hide quick links:
Advertisement
Table of Contents
