Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hyundai HYSP250C
Summary of Contents for Hyundai HYSP250C
- Page 1 HYSP250C...
-
Page 2: Table Of Contents
INDEX CONTENTS PAGE NO.S 3 - 9 SAFETY PART LOCATIONS 11-12 OPERATING INSTRUCTIONS MAINTENANCE TROUBLESHOOTING SPECIFICATION DECLARATION OF CONFORMITY PRODUCT DISPOSAL & RECYCLING CONTACT DETAILS WARRANTY MANUAL UPDATES... -
Page 3: Safety
1. SAFETY General Safety Notes. The operator of the machine is responsible for, and has a duty of care in making sure that the machine is operated safely and in accordance with the instructions in this user manual. Keep the manual safe and pass it on if the machine is loaned or sold to another user. - Page 4 1.10 Carbon Monoxide (where applicable). 1.11 Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause death as well as serious long term health problems such as brain damage. 1.12 The symptoms of carbon monoxide poisoning can include but are not limited to the following;...
- Page 5 1.20 General Fuel Safety (where applicable). CAUTION ALL FUELS ARE FLAMABLE Fire Hazard – keep fuel away from all sources of ignition for example heaters. 1.21 Lamps, sparks from grinding or welding. 1.22 DO NOT carry out hot work on tanks that have contained fuel. 1.23 ALWAYS keep the work area tidy.
- Page 6 1.46 All trailing cables should be routed so as not to cause any kind of trip hazard. 1.47 NEVER work on or near electricity with wet hands, wet clothing and wet gloves. 1.50 Batteries (where present). 1.51 Batteries present a risk if they become damaged by the possible leaking of electrolyte.
- Page 7 recommended to observe the condition of your hands and fingers. Seek medical attention immediately if any of the above symptoms should occur. 1.70 Noise (where applicable). 1.71 The operating noise of the machine can damage your hearing. Wear hearing protection such as earplugs or ear defenders to protect your hearing. Long-term and regular users are advised to have hearing checked regularly.
- Page 8 MACHINE SPECIFIC SAFETY (Continued) • The pump must be used with 230V AC Power supply, as indicated on the rating plate. • Make sure that electric connections are protected from humidity. • Avoid dry-running of the pump. Never use the pump if suction hose is obstructed. •...
- Page 9 MACHINE SPECIFIC SAFETY (Continued) • Follow these instructions to use the pump, its accessories, connectors, etc properly. The pump must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. •...
-
Page 10: Part Locations
2. PART LOCATIONS Your pump is designed for domestic use. It can be used to remove or transfer. Your pump must not be used in the following situations: - Water above 35°C - Continuous run e.g. fountain pump - Drinking water supply or washing machines for dishes supply - Corrosive, easily combustible, aggressive or explosive liquids (such as gasoline, petroleum or nitro thinner), saltwater, oils and greases must not be pumped - Permanent submersion under 3 meters or more water... -
Page 11: Operating Instructions
3. OPERATING INSTRUCTIONS NOTE Attach a sufficiently long and strong rope to the handle before first use. The pump is submerged into the liquid by using the rope. In case of continuous use of the pump with the rope, the condition of the rope must be checked regularly. -
Page 12: Maintenance
3.10 The pump will begin to drain the liquid. 3.11 As the liquid level falls, so will the float switch. 3.12 Once the float switch reaches the desire depth, the pump will automatically turn off. 3.13 When finished, disconnect the pump from the mains power supply. 4. -
Page 13: Troubleshooting
5. TROUBLESHOOTING Problem Possible Cause Possible Solution No mains power Turn on mains power Fuse blown Inspect and replace fuse Internal thermal cut out has not Leave 5 to 10 minutes and try reset again Extension cord faulty Replace extension cord Pump will not start Disconnect from the mains Impeller jammed... -
Page 14: Specification
6. SPECIFICATION Model HYSP250C Voltage – v 230v – 50Hz Power – w 6000 Max Flow Rate – l/h Head – m Max Depth – m Outlet Hose Size Inlet Diameter 1" 1-1/4" 1-1/2" Max Particle Diameter – mm Max Water Temperature - °C... -
Page 15: Declaration Of Conformity
7. DECLARATION OF CONFORMITY Genpower Ltd confirms that this Hyundai product conforms to the following CE Directives; LVD Directive: 2014/35/EU EMC Directive: 2014/30/EU Directive ROHS 2011/65/EU EC DECLARATION OF CONFORMITY The undersigned. As authorised by: Genpower Ltd Declares that the following equipment manufactured under licence by Hyundai Korea... -
Page 16: Product Disposal & Recycling
8. PRODUCT DISPOSAL & RECYCLING We do not offer a take back scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and or batteries is passed onto you by So when it becomes necessary to dispose of your machine you must take it to your Local Civic Amenity Site. -
Page 17: Contact Details
WEBSITE www.hyundaipowerproducts.co.uk 10. WARRANTY Proof of purchase will be required before you make a warranty claim. 10.0 Full warranty terms and conditions can be found on the HYUNDAI POWER 11. MANUAL UPDATES PRODUCTS website: www.hyundaipowerproducts.co.uk 11. MANUAL UPDATES 11.0 Our manuals are constantly being reviewed and updated. - Page 18 12. NOTES...
- Page 19 12. NOTES...
- Page 20 Isaac Way, London Road Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported/Distributed by GENPOWER LTD for The United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...
Need help?
Do you have a question about the HYSP250C and is the answer not in the manual?
Questions and answers