5.17
Remove the priming plug from the top of the pump.
5.18
Fill the pump with clean water up to the top of the discharge outlet.
5.19
Replace the priming plug.
Locating the Strainer Basket into the Water Source
5.20
Place the strainer into the water to be pumped, the basket MUST be fully immersed
in water.
5.21
NEVER operate the pump without the strainer connected to the end of the suction hose.
5.22
Keep the strainer out of sand or silt, place in a bucket or on top of stones.
5.23
DO NOT let the pump run dry as damage to the seals may result.
15