DURKOPP ADLER 550-867 Additional Instructions page 8

Setting up the fingerprint scanner
Fig. 4: Updating the software (1)
3. Tap the Exit button on the start screen.
 The display switches to:
Fig. 5: Updating the software (2)
4. Confirm with Yes.
Important
It is absolutely necessary that you confirm the message with Yes instead
of with PC down. This is the only way to exit the program and leave
the control panel switched on. The program must not be open while the
software is being updated.
 The control panel shows the Windows user interface.
5. Connect the USB key at the control panel.
6 Additional Instructions 550-867 - 01.0 - 02/2019