Fig. 25: Logging on using the fingerprint scanner (2)
(2) - Fingerprint sensor
2. Place your finger tip on the fingerprint sensor (2) for approximately
The control panel switches from the start screen to the start screen of
Information
If the fingerprint is not recognized because it is unknown or was captured
only partially, a corresponding error message will be displayed. If a user is
logged in, they will be logged out automatically.
Repeat the login procedure.
22
3 seconds.
the corresponding security level.
(3) - Fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019
Operation
③
②