DURKOPP ADLER 550-867 Additional Instructions page 14

6. Stored in this folder are all USB ports named COMXX.
Fig. 9: Setting up the USB port
7. Right-click on one of the COM3 ports.
 The menu opens.
8. Select properties.
9. Tap Details.
10. Select Device instance path in the pull-down menu.
 The original COM3 port is named ...DAUSB001A...
11. To rename the USB port, right-click on the new USB port.
 The menu opens.
12. Select Properties.
13. Tap Port Settings.
14. Leave the default settings as they are and click on the Advanced button.
15. For COM Port Number select COM19 from the drop-down menu.
 The USB port for use with the fingerprint scanner has now been set
16. Close the window.
17. Switch off the machine.
18. Switch on the machine.
 The settings are saved.
12
COM1-COM15 have already been set up at the control panel.
The new USB port will be generated as additional COM3 port. The
USB port must be renamed as COM19.
original COM3 port
The USB port of the Fingerprint scanner is named
...A906YYN7A... . This port mus be renamed as COM19.
up as COM19 in the system.
Setting up the fingerprint scanner
USB port
Fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019