DURKOPP ADLER 550-867 Additional Instructions page 21

Operation
Information
If the fingerprint is not detected at all or only in part, the following error
message will be displayed:
Fig. 21: Creating a new user using fingerprint detection (9)
This error message is of no consequence. You can scan your fingerprint as
many times as necessary until it has been detected successfully 3 times.
The process does not have to be canceled.
12. Confirm with OK.
13. Place your finger tip on the fingerprint sensor (2) for approximately
 The display switches again to one of the two displays.
14. Confirm with OK.
15. Place your finger tip on the fingerprint sensor (2) for approximately
 After 3 successful scans, the display will switch to:
Fig. 22: Creating a new user using fingerprint detection (10)
16. Confirm with OK.
 An Identity number will appear automatically in the input field of
Additional Instructions 550-867 - 01.0 - 02/2019
3 seconds.
3 seconds.
the same name.
19