Table of Contents
Advertisement
Electrical Connection
1.
Electrical wiring must be done by a quali ed professional in
accordance with all applicable codes and standards. Turn off
electrical power at service panel before wiring.
2.
Do not extend the cord with an extension cord or splitter that
is not supplied with the hood.
3.
Grounding of this product is compulsory. Do NOT remove
ground prong of the plug.
3.
The maximum distance between the power outlet and the unit
is 50". Do not stretch or over-tighten the power cord.
LIGHTING
The range hood requires two type JCD, 12V, 20W max, G-4 base,
halogen bulbs.
WARNING: Always switch off the electrical supply before
carrying out any operation or maintenance on the appliance.
1.
Remove the halogen bulb cover with a athead screw driver.
2.
Remove the bulb by pulling it out of its socket horizontally.
DO NOT ROTATE THE BULB.
3.
Replace the bulb with an identical type JCD, 12V 20W G-4
base halogen bulb. DO NOT touch replacement bulbs with
bare hands.
CAUTION: The surface, the cover of the bulbs, and the bulbs
themselves may be hot. Please use extra care when removing
them.
6
50"
Advertisement
Table of Contents
