4. MAINTENANCE
4.1.2 Pinch Roller (Cont.)
12. Attach the Ribbon End Sensor Plate to the printer.
(1) Engage the notches on the both sides of the Ribbon End Sensor
Plate with the Positioning Pins of the printer.
Ribbon End
Sensor Plate
Positioning Pin
(2) Fit the tip of the Pinch Roller Plates into the slot in the Ribbon
End Sensor.
E4- 4
Positioning Pin
Ribbon End Sensor Plate
Pinch Roller Plate
Slot
ENGLISH VERSION EO1-33057
4.1 Cleaning
Slot
Notch