Pinch Roller - Toshiba B-SX8T SERIES Owner's Manual

4. MAINTENANCE
4.1.1 Print Head/Platen
(Cont.)

4.1.2 Pinch Roller

NOTE:
Be sure to set the Head Lever to
Position 2, otherwise the Pinch
Roller cannot be removed.
Head Lever
Position 2
CAUTION!
Do not pull hard on the Ribbon
End Sensor Plate. Doing so
may damage the Ribbon End
Sensor Harness, causing a
printer failure.
7. Wipe the Platen with a soft cloth slightly moistened with absolute
ethyl alcohol
Platen
1. Turn off the power and unplug the printer.
2. Set the Head Lever to the "OPEN" position.
3. Open the Top Cover and Right Side Cover.
4. Open the Head Lock Plate.
5. Turn the Pinch Roller Lever clockwise to release the Pinch Roller.
Pinch Roller Lever
6. Remove the ribbon and media from the printer.
7. Set the Head Lever to the Position 2.
8. Remove the White Screw and detach the Ribbon End Sensor Plate in
the direction of the arrows.
1
E4- 2
ENGLISH VERSION EO1-33057
Ribbon End Sensor
Plate
White Screw
2
Ribbon End Sensor
Plate
4.1 Cleaning