Toshiba B-SX8T SERIES Owner's Manual page 83

Toshiba barcode printer owner's manual
Hide thumbs Also See for B-SX8T SERIES:
Table of Contents

Advertisement

2. PRINTER SETUP
2.10 Print Test (Cont.)
When using an optional Cutter Module or Strip Module
It is necessary to set the issue mode, cut/strip position, etc. for the Printer
Driver or TPCL (TEC Printer Command Language) in accordance with
your printing condition.
For details of the TPCL, refer to the B-SX6T/SX8T Series External
Equipment Interface Specification stored in the CD-ROM.
Regarding how to use the Printer Driver, refer to the Help for the
Windows Printer Drivers screen.
To gain maximum performance and life from the Cutter Module or Strip
Module, periodic cleaning is required.
Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
of injury.
For details of cleaning, refer to Section 4.1.5 Optional Cutter Module
or Section 4.1.6 Optional Strip Module.
E2-69
ENGLISH VERSION EO1-33057
2.10 Print Test

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eo1-33057dEo1-33057

Table of Contents